1.
The method to obtain parallel TA15 titanium alloy electron beam welding seam
TA15钛合金电子束焊平行焊缝的获得方法
2.
Research on Parallel Seam Sealing Process for LSI;
大规模集成电路的平行缝焊工艺研究
3.
The Application of AC Servo Control System in Seam Welding Equipment
交流伺服系统在平行缝焊机中的应用
4.
Indicates concave, convex or flush welds. Increase height to fit above other weld symbol.
指示凹焊缝、凸焊缝或平焊。增加高度以配合其他焊接符号。
5.
Automatical EB Welding of Curved Weldment
工件平面曲线焊缝的电子束自动焊接
6.
Superplastic Behavior of Weld Metal by Friction Stir Welding
搅拌摩擦焊接焊缝金属的超塑性行为
7.
Transfer Behavior Study in Weld Thickness Direction of the Welding Plastic Metal in Friction Stir Welding
搅拌摩擦焊焊缝塑性金属在焊缝厚度方向的迁移行为研究
8.
Through the algorithms, robot can weld the workpiece on downhand welding position, which is easer to ensure the good welding quality.
通过机器人系统的运动学和平焊位置算法,可以实现焊缝在平焊位置焊接,从而保证了焊接质量.
9.
Drag onto the page to add concave, convex, or flush welds. Increase height to fit above other weld shapes.
拖到绘图页后，可以添加凹焊缝、凸焊缝或平焊。增加高度以配合其他焊接形状。
10.
Electrochemical Corrosion Behavior of Friction Stir Welding Dissimilar Weld of 5083 and 6082 Aluminum Alloy
铝合金5083-6082搅拌摩擦焊焊缝的电化学腐蚀行为
11.
The backing plate shall be welded with matching electrodes so that the weld on the clad side is flush with the backing plate surface.
底板用配套焊条焊接，使复层侧的焊缝与背衬板表面齐平。
12.
Study of Welded Pipe Seam Quality Detection and Automatic Elimination of Welded Pipe with Fault in Seam Systems;
平板焊管焊缝质量检测及缺陷焊管自动剔除系统的研究
13.
Effect of Nb and V in high carbon steel weld metal
铌和钒在高碳钢质焊缝金属中的行为
14.
Dye penetrant examination of the completed weld.
对已完成的焊缝进行着色渗透检测。
15.
Research on Laser Beam Welding Superplastic Deformation Behavior of Ti6Al4V Alloy
TC4钛合金激光焊缝超塑性行为研究
16.
Welding the welds which are stagger first, then is the straight ang long weld.
先焊错开的端焊缝，后焊直通长焊缝。
17.
Weld seam formation control of root pass for pipeline MIG welding based on an embedded DSP visual servo platform
基于嵌入式DSP视觉伺服平台的管道MIG打底焊焊缝成形控制
18.
Specially suitable for zinc patching of weld seam in tube welding line, and capacitor spray.
本套设备适合于高频焊管生产线上进行焊缝的补锌及电容喷涂。