1.
Analysis of Causes of Deformation and Cracking Inefficiency on Top-beam Central Section of ZZS4600/13/25 Hydraulic Supports
ZZS4600/13/25液压支架顶梁中部变形开裂失效分析
2.
Improvement of Heat Treatment Process to Prevent WEDM Mold from Distortion and Cracking
线切割模具变形开裂的热处理工艺改进
3.
Technical Exploration on How to Reduce the Deformation and Avoid Cracking by Heat-treatment;
减小热处理变形、防止开裂的技术探讨
4.
Research on Deformation Mechanism and Fracture Criterion of Ti40 Burn Resistant Titanium Alloy in Hot Metal Forming;
Ti40阻燃合金高温变形机理及开裂准则研究
5.
Failure Analysis for Cracking and Deflection Deformation of Pressure Pipe-line in Synthesis Ammonia Equipment
合成氨压力管线开裂失效及挠曲变形分析
6.
Cleft almost to the base, so as to have distinct divisions or lobes.
裂缝接近底部，形成明显的开裂或裂片
7.
After the high temperature, cooking, block of wood deformation, splits, wrot, grit working procedure such as glorifying, drenching lacquer, the product are durable.
经高温，蒸煮处理，不变形，不开裂，刨光，砂光，淋漆等工序，产品经久耐用。
8.
Elsewhere throughout the central building the concrete frame was severely strained and cracked.
整个中间大楼的所有地方，混凝土构架严重变形和开裂。
9.
cleft palate ;deformed condition in which the roof of a person's mouth is split at birth
唇裂（出生时唇板裂开的畸形）.
10.
fission fusion fission bomb
裂变 聚变 裂变弹
11.
Deformation and Fractue of Micro─Zone Adjacent to Interface in Steels ──Ⅱ─Deformation and Fracture in Region Adjacent to Interface between Phases
钢中近界面微区的形变与断裂──Ⅱ─相界面近区的形变与断裂
12.
Prediction of radial crack of the workpiece during the splitting spinning based on ductile fracture criteria
采用韧性断裂准则预测分形旋压径向开裂
13.
Study on Mechanism and Criterion for Brittle/Ductile Fracture and Theory of Crack-tip Deformation;
脆性/韧性断裂机理与判据及裂尖变形理论研究
14.
Effects of the Surface Perturbation and the External Stress on the Evolutons of Microcracks;
裂面形貌扰动和外载对微裂纹演变的影响
15.
Fatigue Deformation and Fracture Behavior of Extruded AZ81 Mg Alloy;
挤压变形AZ81镁合金的疲劳变形及断裂行为
16.
Experimental Analysis of Three-dimensional Deformation in Large Deformation Fracture
大变形断裂力学问题三维变形场实验研究
17.
Research on Low-cycle Fatigue Behavior of Extruded 6061 Aluminum Alloy
挤压变形6061铝合金的疲劳变形及断裂研究
18.
The reasons of cracking and large deformation on common reinforced concrete continuous beam bridge were discussed.
就普通钢筋混凝土连续箱梁桥产生开裂和过大的变形等问题的产生原因进行了一定的探讨。