1.
Technology of rapid coring in underground continuous wall trench
地下连续墙槽孔内快速取芯施工工艺
2.
carbide-tipped internal turning recessing too
硬质合金内孔切槽焊接车刀
3.
Precise Machining Technology of Thin-Wall and "Deep-Hole" Inner-Conductor Chocke-Slot
内导体薄壁“深孔”扼流槽精密加工技术
4.
Special Devices Suitable for Machining the Annular Tank by Using the Radial Drilling
适用于摇臂钻床加工内孔环形槽的特种装置
5.
Never spill liquid on the product or drop object into the ventilation slot and openings
勿将液体溢到产品上或使物体掉进通风槽或孔内
6.
"The pin gauges are used to measure the whole distance, the pitch diameter of the thread, etc. Especially, they are suitable for curved groove width measurement."
针规适用于机械加工中孔径、孔距、内螺纹小径的测量,特别适于弯曲槽宽及模具尺寸的测量。
7.
Mount restrictor bar into the restrictor bar groove of upper die, mount adjusting bolt for restrictor bar into the bolt hole in the restrictor bar, then mount lower press block, upper press block.
在上模节流棒槽内装入节流棒，将节流棒调节螺栓装配进节流棒的螺丝孔中，再装配上压块。
8.
There is one oil groove in the bronze bushing, where lubricant can flow into the axis from the oil hole on the cap of housings.
轴瓦内表面的不承担载荷部分开有油槽，润滑油通过进油孔和邮沟流进间隙。
9.
D. Clean the slots of O-rings, Talfon slots, body spindle and spherical surface intensively.
形环沟槽，铁氟沟槽，主体轴心孔及球面加强清洗。
10.
Study on Effect of Symmetry of Wedge-shaped Cutting Hole Angle on Cut Blasting
楔形掏槽炮孔角度对称性对掏槽效果影响研究
11.
The kibble hole arrangement optimization of tunnel digging blasting of Daanshan mine
大安山矿巷道掘进爆破掏槽孔布孔优化
12.
guttering of porous common pottery
普通多孔陶质料制的雨槽管
13.
Slotted capstan screws
GB/T832-1988开槽带孔球面圆柱头螺钉
14.
The keyhole of a cylinder lock.
钥匙槽圆柱形锁的钥匙孔
15.
Study of Method of Conducting Smooth Blasting in Weak and Soft Surrounding Rocks
软弱围岩中光面爆破掏槽孔方案研究
16.
Characteristics of the differential pressure signals of slotted orifice based on higher-order statistics
槽式孔板差压信号的高阶统计量特征
17.
Rock-socketed Diaphragm Retaining Wall Construction Using Punching Groove Section Technology
嵌岩地下连续墙冲孔槽段施工新工艺
18.
To join by or fit into a gain.
在腰槽内连接或配合