1.
Online visual inspection method for O-ring number on the pipe connectors
管接头上密封圈数量在线视觉检测方法
2.
Appearance quality for reciprocating rubber seals
GB/T15325-1994往复运动橡胶密封圈外观质量
3.
Appearance quality for rotary shaft lip seals
GB/T15326-1994旋转轴唇形密封圈外观质量
4.
chev(e)ron ring
人字密封圈, v型圈
5.
Appearance quality acceptance criteria for rubber O-rings
GB/T3452.2-1987O形橡胶密封圈外观质量检验标准
6.
rubber sealing ring for medical sterite cooker
医用消毒锅橡胶密封圈
7.
rubber sealing ring for pressure cooker
日用压力锅橡胶密封圈
8.
An Improved Design on Seal Groove and Seal Ring of Spherical Plain Bearing
关节轴承密封槽及密封圈的设计改进
9.
Rubber--Recommendations for the workmanship of pipe joint rings--Description and classification of imperfections
GB/T17604-1998橡胶管道接口用密封圈制造质量的建议疵点分类与类别
10.
Study on the Dynamic Auxiliary Seal Ring of Pusher Type Mechanical Seal
滑移式机械密封的动态辅助密封圈性能研究
11.
Study on the Dynamic Auxiliary Seal Ring of Dry Gas Seal;
干气密封装置动态辅助密封圈性能研究
12.
Effects of Dimensional Tolerance on Sealing Characteristic of O-ring;
O形橡胶密封圈尺寸公差对密封性能的影响
13.
Finite Element Analysis on Rubber Sealing Y-ring in the Condition of Static Seal
静密封条件下Y形橡胶密封圈有限元分析
14.
Finite Element Analysis of Stress and Contact Pressure of Rubber O-sealing Ring with Back-up Ring
O形橡胶密封圈配合挡圈密封的应力与接触压力有限元分析
15.
A wide range of standard stampings, non-standard products, stainless steel washers, internal/ external teeth washers, rings, circlips for holes, circlips for shaft, other fasteners, fittings, seal washers and clamps主要生产各种标准件冲压件.各种非标产品.
不绣钢垫圈;内外齿垫圈;挡圈;孔用挡圈;轴用挡圈;纱嘴头,其他紧固件、接件密封垫圈卡圈.
16.
Finite Element Analysis of O-Ring with Single Side Gasket
加有单侧挡圈的O形密封圈有限元分析
17.
Numerical study of leakage and dynamic coefficients of stepped labyrinth gas seals
阶梯式迷宫密封泄漏量和动特性数值研究
18.
The primary function of sealing gasket is to prevent gas from leakage.
密封垫圈的主要作用是防止气体泄漏。