1.
The Diagrams and Brief Descriptions of Common Troubles in Press Mounting Curves for Bearings on Railway Freight Cars
铁路货车轴承压装曲线常见故障图样与简要说明
2.
low bearing oil pressure governor
轴承低油压遮断装置
3.
bearing oil pressure trip device
轴承低油压脱扣装置
4.
Analysis of the Cylindricity Tolerance and Press Mounting Curves of Axle Wheel Seat and Wheel Hub Bore
关于车轴轮座、车轮轮毂孔的圆柱度公差和压装曲线分析
5.
Buckling capacity optimization of cylindrical shell with rectangle stiffeners under uniform axial compression
矩形加筋圆柱壳轴压屈曲承载力优化
6.
The Influence Analysis on Precision of Press Caused by the Diameter Deviation of the Crank Supporting Neck
曲轴支承颈的轴径误差对压力机精度影响分析
7.
upper center crankshaft bearing
曲轴主轴承上中轴瓦
8.
Axial load-deformation curve and preload on angular con act ball bearings
角接触球轴承的轴向载荷—变形曲线和预紧
9.
Structure Optimization for Hydrostatic Supporting Bush of Crank Shaft and Rod Type Hydraulic Motor
曲轴连杆式液压马达静压支承连杆瓦结构优化
10.
Structure Design of 320T Hydraulic Pressure Roller Bearing Disassembly and Assembly Device;
320T液压轴承拆装机的组成及工作原理
11.
plain bearing housing with bearings
装有轴承的普通轴承座
12.
housing bearing plain without bearings
未装轴承的普通轴承座
13.
Strain Distribution Curves for Cement Concrete under Axial Compression
水泥混凝土轴心受压应变的分布曲线
14.
production line of ball bearing after assembly
球轴承装配后工序生产线
15.
The Design of Orifice Compensated Hydrostatic Bearing on Over Loading Crankshaft of Oxygen Compressor
氧气压缩机重载荷曲轴用小孔节流静压轴承的设计
16.
The feed holes for the crankshaft main bearings.
曲轴主轴承进入口。
17.
Crankshaft and main bearings service
曲轴和主轴承的维修
18.
Effect of bending angle on hydroforming of curved hollow components
弯曲角度对弯曲轴线件内高压成形的影响分析