1.
Selection of complex coating and application technology test for work pieces of hot dip galvanized steel
热镀锌钢工件复合涂层的选择与涂装工艺试验
2.
Process and Property of Hot Dip Zn-Ni Alloy Coating for Reactive Steel
活性钢热浸锌镍合金镀层工艺与性能
3.
Improvement Improvement of Hot Dip Galvanizing Techniques for Threaded Type of OCS Fittings
螺纹类接触网零件热浸镀锌工艺改进
4.
Coater Process Control of Masteel 2~# CGL
马钢一钢轧2~#热镀锌线辊涂机工艺控制
5.
Improvement of heat treatment and hot-dip galvanizing process for 42CrMo steel multisection draw-bar
42CrMo钢多节拉杆热处理及热浸镀锌工艺改进
6.
Property requirement and production process of hot-dip galvanizing steel wire for bridge cables
桥梁缆索用热镀锌钢丝的性能要求与加工工艺
7.
Study on Laser Brazing with Filler Wire for Galvanized Steel Sheets and Numerical Simulation of the Thermal Process;
镀锌钢板激光填丝钎焊工艺与热过程数值模拟
8.
Process and measure of improving hot-galvanizing steel wire quality to reduce consumption
提高热镀锌钢丝质量降低消耗的工艺措施
9.
Preparation and Corrosion Resistance of Silane Film on Hot-dip Galvanized Steel
热镀锌钢板表面硅烷膜的制备工艺与耐蚀性能
10.
Effects of Processing Parameters on Microstructure and Properties of 800 MPa Hot Dip Galvanized Dual Phase Steel
工艺参数对800MPa热镀锌双相钢组织性能的影响
11.
Aplataer process
热镀锌法 -铅锌法热镀锌
12.
Analysis and Improvement of Dross Pick-up in Hot Dip Strip Coating
热镀锌带钢镀层锌渣缺陷形成分析及改进技术
13.
Continual hot-dip zinc-coated steel sheets and strips
GB/T2518-1988连续热镀锌薄钢板和钢带
14.
Continual hot-dip aluminium zinc silicon alloy coated steel strips and sheets
GB/T14978-1994连续热浸镀铝锌硅合金镀层钢带和钢板
15.
Study of the Influence of Annealing and Temper-rolling Process on the Mechanical Properties of Deep-Drawing Quality Galvanised sheet
退火与平整工艺对热镀锌深冲钢力学性能的影响研究
16.
A Brief Introduction to High Al-Zinc Alloy Hot Dip Galvanizing Technology for Baosteel CR 3~# CGL
宝钢冷轧3号热镀锌机组采用的高铝锌合金热浸镀生产技术简介
17.
The technique of hot dip Zn-Ni alloy coating is an effective method for solving the reactive steel problem in hot dip galvanizing.
热浸锌镍合金镀层技术是解决活性钢热镀锌问题的有效方法。
18.
Continual hot-dip zinc-coated steel strips with a width less than 700mm
GB/T15392-1994宽度小于700mm连续热镀锌钢带