1.
OPTIMIZATION OF FIXTURE LAYOUT AND DYNAMIC CLAMPING FORCE BASED ON GENETIC ALGORITHM AND FINITE ELEMENT METHOD
基于GA和FEM的夹具布局和变夹紧力优化设计
2.
Finite Element Analysis for the Deformation of Workpiece Under the Fixture Forces
夹紧力作用下工件变形的有限元分析
3.
Study on Controlling Method of Metal Belt Continuously Variable Transmission (CVT) in Clamping Force Aiming Slip Rate;
汽车无级变速器滑转率与夹紧力控制研究
4.
Study of Clamping Force Control Strategy for CVT
金属带式无级变速器夹紧力控制策略的研究
5.
The Optimizing Clamping Force Control for Metal Pushing V-belt Continuously Variable Transmission Based on the Slipping;
基于滑移的金属带式无级变速器最佳夹紧力的控制研究
6.
Fault Diagnosis of CVT Clamping Force Control System Based on Least Squares Support Vector Machine Model
基于LS-SVM模型的无级变速器夹紧力控制系统故障诊断
7.
New jig design, low noise power Jiajin smooth, reliable, Mianweihu.
全新夹具设计，噪音低夹紧力平稳、靠，免维护。
8.
The circle indicates the squeezing of its robotic grip; as the force of the grip increases, the circle widens.
圆周表示机器人的手钳夹紧；夹力增加，圆圈扩大。
9.
Hydraulic bi-directional clamping fixture composed of hydraulic cylinder and toggle-lever reinforcement mechanism
基于液压缸的铰杆—杠杆增力双向夹紧液压夹具
10.
clamp the chair together until the glue has hardened.
把椅子夹紧直到胶水变硬。
11.
Finite Element Simulation of the Thin-wall Hydraulic Cylinder's Clamping Deformation
薄壁液压缸筒夹紧变形的有限元模拟
12.
Smaller taper angle of collet, larger clamping power.
弹性套锥形角更小，故夹紧力更大。
13.
Pressure Setting of Press-keeping Clamping Circuit Based on Accumulator
基于蓄能器保压夹紧回路的压力设定
14.
Influence of Clamping Forces on Radial Rigidity of AHO Tooling System
夹紧力对AHO工具系统径向刚度的影响
15.
Study on an Electric Clamp and Its Original Axis Force on a Testing Machine;
试验机拉伸夹具电动夹紧及初始轴向力问题研究
16.
Optimizing Fixture Layout and Clamping Force Simultaneously Using Genetic Algorithm;
基于遗传算法的夹具布局与夹紧力同步优化技术
17.
One Kind of Pneumatic Bi-directional Floating Clamping Device with Toggle-Lever Force-Amplifier
基于铰杆-杠杆串联增力机构的双向浮动夹紧气动夹具
18.
Evolution of Pinch Point Zone and Batch Distillation Process with a Side Withdrawal;
夹紧区变化规律及带侧线分批精馏过程研究