1.
Numerical Simulation to Size Surface-breaking Tilt Cracks by Ultrasonic Spectral Method
表面开口斜裂纹超声表面波频谱法测量的数值模拟
2.
Relationship between stress distribution along slant crack and opening displacement on crack-surface
倾斜裂纹的应力分布与裂纹面开口位移的关系
3.
Numerical Simulation to Sizing Surface-Breaking Cracks by Ultrasonic Surface Wave Spectral Method
表面开口裂纹超声表面波频谱法测量的数值模拟
4.
Elastic-Plastic Finite Element Analysis for Circumferential Part-Throughwall Cracks on Mitered Elbow;
斜接弯管环向内表面裂纹弹塑性有限元分析
5.
NUMERICAL SIMULATION OF 3-D INCLINED SEMICIRCLE SURFACE CRACK PROPAGATION
三维斜置半圆形表面裂纹扩展数值模拟
6.
Simulation Study on Growth Behavior of Rail Tread Oblique Crack;
钢轨踏面斜裂纹扩展行为的仿真研究
7.
cashmere double
开士米斜纹面平纹底织物
8.
Numerical simulation of slit type cracking test for 9%Ni steel
9%Ni钢斜Y形坡口裂纹试验的数值模拟
9.
ON THE FORMATION MECHANISM OF INTERNAL AND SURFACE CRACKS OF CONTINUOUSLY CAST SIABS
连铸板坯内部裂纹和表面裂纹的形成机理
10.
Opening and sliding displacement behavior of a slant angle fatigue crack under mixed-mode conditions
倾斜疲劳裂纹在混合型应力下张开及滑移特性
11.
One of the parallel ribs or ridges in the surface of a fabric such as corduroy.
凸条织物表面的平行凸纹或隆起，如灯蕊绒斜纹
12.
Opening-closing state analysis on rail surface cracks under rolling-contact loading
滚动接触载荷作用下的铁轨表面裂纹开合状态分析
13.
reversed jeanette
【纺】反面细斜纹布
14.
No stress measurements or crack surface samples were available for examination, only the surface crack configuration.
没有应力测量或裂纹表面取样可用于检验，只能依据表面裂纹图形。
15.
The results show that the fracture surface is characterized by a combination of most intergranular brittle regions and a few cleavage regions, and there are finer precipitations on grainboundaries.
结果表明，成型模裂纹断口形态呈沿晶特征，沿晶面上有细小析出物，为脆性断裂。
16.
The open would with seperated surfaces, which must cover itself with large amounts of exposed granulation tissue.
表面裂开的开放伤口，其上面须覆盖大量暴露的肉芽组织。
17.
Filling -faced twills are those in which the picks predominate on the face of the fabric; warp- faced twills have a more evident warp on the surface.
纬面斜纹织物的表面由纬纱构成；经面斜纹的织物表面则经纱比较明显。
18.
If twill tape is useful, slit the hole with a hemostat.
如果用的是斜纹带就要用止血钳来张开小口。