1.
A Study on the Best Descend Moment of the Sawing Leg to the 110 Meters Column
110m栏攻栏腿最佳下压时机探讨
2.
a lever that actuates a mechanism when depressed.
下压时可以开动机械装置的杠杆。
3.
Aerodynamic stability assessment for compression component running in turbofan engine with distorted flow
畸变进气时涡扇发动机整机环境下压缩部件气动稳定性评定
4.
Many glassreinforced composites are translucent when removed hot from the press.
许多玻璃增强复合材料从热的压机上取下时是透明的。
5.
Effect on the operative opportunity of fracture-dislocation of the lower cervical spine on intraoperative reduction and decompress
下颈椎骨折脱位手术时机选择对术中减压复位及疗效的影响
6.
Instability Analysis of the Rev of High-voltage Electromotor at Short-term Overload
矿山高压电动机在短时过载下的转速不稳定分析
7.
Research on flow instability triggering process at stall condition of transonic compressor rotor at low Reynolds number
低雷诺数下跨声速压气机转子失速工况时流动失稳触发过程研究
8.
drooping voltage generator
电压下降特性发电机
9.
Automatic slow cutting when the cutting plate presses downward and touches the cutting die.ensuring no size error between the top and bottom layers of cutting materials.
裁断机板下压接触刀模时自动慢切，使裁断机最上层与最下层没有尺寸误差。
10.
When discharging, the motor operates, hydraulic cylinder charges pressure, push rod (piston rod) draw back, the valve plate connected with push rod opens, the materials are discharged.
当需要卸料时，电机运转，液压缸增压，推杆（活塞杆）收回，和推杆连接的阀板开启，物料卸下。
11.
JEDEC ? The input threshold voltage when the input voltage is falling.
在输入电压下降时的输入门限电压。
12.
Research on pressure distribution for full-hydraulic underground coiler machine
全液压地下卷取机卷筒压力分布研究
13.
Variable factor control of AGC for hot strip mills
热连轧机液压压下变系数控制的应用
14.
Analysis on dynamic characteristics of pressure pump for hydraulic screw down system in cold rolling mill
轧机液压压下系统恒压变量泵动态特征分析
15.
The second floor gave way under the weight of the machines.
三楼地板在机器的重压下坍了下去。
16.
corker ,bottle, mechanical, weighting 10kg or less
封瓶用机械压塞机,重10㎏以下
17.
Design of 3500mm Mill Crewdown Device
3500mm轧机机械压下装置的设计
18.
Quadratic Optimal Control on Dynamic Soft-reduction Hydraulic System of Continuous Caster
连铸机动态轻压下液压压下系统的最优二次型控制