1.
Research on the GA-based Optimize Design of Al-Pb-Steel Bearing Material Continuous-Casting Process
基于遗传算法的铝铅系轴瓦连铸工艺优化研究
2.
The technique of copper-lead antithrust axle bush is in the lead in China.
铜铅曲轴止推瓦生产技术国内领先。
3.
Low Ni High Mn Cu-Al Alloy Bush for Hot Plate Mill
低镍高锰铜铝合金轴瓦新材料的研究
4.
For this big-end bearing, steel-backed lead or tin shell bearings are used.
对连杆大头轴承来说，使用的是铅的钢背或锡的轴瓦式轴承。
5.
Manufacture and Application of Carbon Fiber Lead Bronze Composite Bush
碳纤维-铅青铜复合材料轴瓦的制造与应用
6.
Bonding Mechanism and Strength of Al-Pb Alloy Strips and Hot Dip Aluminized Steel Sheets by Hot Rolling
铝铅轴承合金与热浸铝钢板的热轧复合机制与结合强度
7.
EFFECT OF Si ON THE INTERFACIAL BONDING STRENGTH OF Al- Pb ALL OY STRIPSAND HOT DIP AL UMINIZED STEEL SHEETSBY HOT ROL LING
硅对铝铅轴承合金带与热浸铝钢板热轧复合界面强度的影响
8.
It has5 production lines, including an antithrust axle bush line and copper-lead bushelec-troplating line.
公司现有五条生产线包括一条曲轴止推瓦生产线及铜铅轴瓦电镀三元生产线。
9.
Study of New Graphite Particle/Al Alloy Matrix Self-lubricating Bearing Material
新型石墨颗粒/铝合金复合自润滑轴瓦材料的研究
10.
Dynamic Coefficients of Tilting Pad Guide Bea-rings of Hydraulic Turbine Sets, Power Engineering
水电机组可倾瓦导轴承动力特性系数
11.
The Development on Bearing Bush Measurement System Based on Virtual Instrument;
基于虚拟仪器的轴瓦测试系统的开发
12.
Triaxial creep characteristics and constitutive relation of gas-containing coal
含瓦斯煤岩三轴蠕变特性及本构关系
13.
upper center crankshaft bearing
曲轴主轴承上中轴瓦
14.
Plain Bearing Block Housings are made up of cap, base ,aluminum bronze bushing and installing bolts, which mainly bear radial load.
滑动轴承座由上盖、底座、剖分轴瓦（铝青铜），安装螺栓组成，主要承受径向载荷。
15.
boring machine for connecting rod and cylinder block bush
连杆瓦及缸体轴瓦镗床
16.
Remove the lower insert from the bearing cap.
从轴承盖上拆去下轴瓦。
17.
Install the lower bearing inserts into the main bearing caps.
安装下轴瓦到主轴承盖。
18.
The results showed that the segregation of Pb atoms in the interface between the alloy and the steel back was the main factor leading to the failure of the bearing bush.
结果表明 ,铅原子在合金层与钢背材料结合面上的聚集是导致轴瓦失效的主要原因。