1.
NUMERICAL INVESTIGATION ON A SUBSONIC AXIAL-FLOW COMPRESSOR ROTOR WITH THE IMPLEMENTATION OF NON-AXIASYMMETRIC HUB END WALL
亚音速轴流压气机转子非轴对称轮毂端壁的数值研究
2.
Investigation of Aerodynamic Design Method for Last Stage Blade of Turbine and Non-axisymmetric Endwall Profiling Technology;
末级涡轮气动设计方法及非轴对称端壁造型技术研究
3.
Improving Efficiency of Axial-flow Compressor with the Application of Non-axisymmetric Stator Hub
利用静子非轴对称轮毂造型提高轴流压缩机效率
4.
SMALLER DIAMETER OF PIVOT BEARING
轮毂轴承的较小直径端
5.
Moment Rigidity Analysis on Flange of Automotive Hub Bearings
轿车轮毂轴承轮毂凸缘力矩刚性分析
6.
wheel hub bearing adjusting nut
车轮毂轴承调整螺母
7.
Install rotor on axle hub.
在车轴轮毂上安装转子。
8.
Hub And Bearing Assembly Mounting Surfaces
轮毂轴承组件固定面
9.
The Meshing Researches on Asymmetrical Tooth Shape of Oscillating-teeth End-face Harmonic Gear;
活齿端面谐波齿轮非对称齿形的啮合研究
10.
Front Stub Axle To Hub Bearing Nut
前螺桩轴至轮毂轴承螺帽
11.
"The wheels were made like carriage-wheels, the rods on which they were fixed, the parts forming their edges, their rods and the middle points of them, were all formed out of liquid metal."
轮的样式如同车轮。轴，辋，辐，毂都是铸的。
12.
Research on the Heat Transfer of the Endwall Film-cooling in Axial Flow Turbine Cascade;
轴流涡轮叶栅端壁气膜冷却的传热研究
13.
A slot for a key in the hub or shaft of a wheel.
键槽轮子的毂或轴里的键的沟槽
14.
Shafts and hubs are usually fastened together by means of keys.
轴和轮毂通常用键固定在一起。
15.
Analysis of the Calculation and the Modes of Break-down of Automobile Hub Bearing
汽车轮毂轴承的计算及失效形式分析
16.
Contact analysis of MW wind turbine hub and bearing bolt connection
风力机轮毂和轴承螺栓联接接触分析
17.
An enlarged part of a shaft to which another shaft is coupled or to which a wheel or gear is keyed.
轮毂一轴与另一轴耦合处或一轴与机轮或齿轮楔合处的增大部分
18.
If the axle shaft and hub bearing are being removed in order to service another component, the axle shaft and hub bearing can be removed as an assembly.
如果维修时需拆卸主动轴和轮毂轴承，主动轴和轮毂轴承可作为一个总成加以拆卸。