1.
Apply a single generous coat of Fired Crackle Color . Be careful not to double back. Crackle effect will begin immediately until dry.
涂上一层裂纹釉于器皿上，要一次过施釉，切勿重复施涂；裂纹效果在色釉接近乾透时即显现。
2.
crackling effect
裂纹效应,龟裂效应,冰花效应;皱纹[涂层]整理
3.
Hard-chromed piston rod with micro-grooves, increasing the rigidity and reducing friction, keep better lubrication action.
活塞杆微裂纹镀硬铬，增因硬度减少磨擦，保持油膜润滑效果值。
4.
The results show that the steel has low weld cold crack sensitivity.
结果表明,该钢具备低的冷裂纹敏感性。
5.
If any cracks are present, the "wet water" flows into the cracks, fills them.
如果有任何裂纹存在，“湿润水”就会流入并充满裂纹。
6.
The paper explains the method of using chemical adhesive to repair machine which is simple in usage and easy to learn. The machine after reparing is good at practical application.
叙述了用化学粘合剂修补机械裂纹的方法。它使用简便,好学易作,修补后的机械,实践效果颇佳。
7.
Elastic-Plasticity Analysis of Ⅰ/Ⅱ Mixed Mode Crack and Probability Caculation of Fracture Failure
Ⅰ-Ⅱ型裂纹的弹塑性分析及断裂失效概率计算
8.
Influence of Ce on Crack Closure Effect and Intrinsic Fatigve CrackGrowth Resistance In Al-Li Alloy
铈对铝锂合金裂纹闭合效应及本征疲劳裂纹扩展抗力的影响
9.
EFFECTIVE MODULI OF AN ELASTIC SOLID WEAKENED BY A PARALLEL ARRAY OF MICROCRACKS
平行微裂纹削弱的弹性体的各向异性有效性能与双周期裂纹模型
10.
Numerical Analysis of Constraint Effect on Crack-Tip and Its Application;
裂纹尖端约束效应的数值分析及应用
11.
Numerical Studies on the Crack Closure Effect in Fatigue Crack Propagation;
疲劳裂纹闭合效应数值模拟方法研究
12.
Failure Analysis of Cracking of Expansion Joint of Incoloy 800 Bellows
Incoloy 800波纹管膨胀节开裂失效分析
13.
Thermal-elastic Fracture of Hollow Cylinder with a Semi-elliptic Surface Crack
含表面裂纹圆柱壳体的热力耦合效应
14.
Longitudinal-cracking Failure Analysis of Box
φ139.7mm钻杆内螺纹接头纵向开裂失效分析
15.
Penetrant Testing Tests and Failure Failure Aanalysis of Cast Stainless Steel Elbow
铸造不锈钢弯头裂纹检测及失效分析
16.
Repair efficiency of cracked panel repaired by a piezoelectric patch
利用压电补片修补裂纹板的效能分析
17.
Optimizing fracture geometry to improve hydrofracturing stimulation effect in Jianghan Oil Region;
优化压裂裂缝型态 提高江汉油区压裂增产效果
18.
The results suggested that the steel has low weld cold crack sensitivity.
结果表明,该钢具备较低的冷裂纹敏感性。