1.
The Realization of the Project of Modular Machine Tool Spindle Positioning Based on Frequency Control
基于变频控制的组合机床主轴定位的工程实现
2.
Realizing Spindle Random Location Orientation Function Using FANUC NC System
用FANUC数控系统实现主轴任意位置的定向功能
3.
The Perpendicular Collision of a Particle and a Homogeneous Bar;
小球与轴线位置可变定轴杆垂直碰撞
4.
Accurate Axial Location for Particles in Digital In-line Holography
同轴数字全息中粒子轴向的精确定位
5.
Localization of Cerebral Sulci and Gyri on the Cross Section;
大脑沟、回在轴位断层影像上的定位
6.
Modeling and Simulation of Tilting Principal Axis Five-axis High-speed Milling Machine
主轴可转位五轴高速铣床的建模与动态仿真
7.
Thus a normal loom has two shafts. The main shaft(crankshaft or top shaft) drives the lay mechanism and is geared to another shaft which operates at half of the speed of the crankshaft.
这样,普通织机应具备两根轴,主轴(曲拐轴或位于上部的轴)驱动筘座并通过齿轮驱动另一根轴。
8.
Layout and Analysis of Machning Scheme for Finish Boring of Crankshaft and Camshaft Bore of Cylinder Block
精镗主轴孔和凸轮轴孔方案的制定与分析
9.
Research on Principal Axis Control System of Variable Vector Propeller of Submarine;
潜器全方位推进器主轴控制系统研究
10.
Fault Diagnosis of Displacement Sensors of Active Magnetic Bearing
主动磁悬浮轴承位移传感器故障识别
11.
Pry the crankshaft forward, position the dial indicator to zero.
向前撬曲轴,定位针盘指示表到0。
12.
Effect of the Axle Box Rotary Arm Positioning Mode on Resilient Nodal Points
轴箱转臂定位方式对弹性节点的影响
13.
Study on axial vibration drilling to improve positioning accuracy
轴向振动钻削提高钻孔定位精度研究
14.
Practice of Location Machining based on Cimatron 5-axis 3+2
基于CIMATRON的五轴3+2定位加工实践
15.
Calculation on Trunnion Position for a 220t High H/D Ratio Converter
220t大高径比转炉耳轴位置的确定
16.
Study on Machining Accuracy of Slender Shaft with Over-positioning
过定位对细长轴加工精度的影响研究
17.
Analysis on the TSI positioning optimization of 1 000 MW steam turbine
1000MW汽轮机TSI调整轴系定位法优化分析
18.
crankshaft (main journal turning lathe)
曲轴(主轴颈)车床