1.
The art of preparing etched plates, especially metal plates, from which designs and pictures are printed.
蚀刻蚀刻工艺，特指用金属版印制图样或图画的技术
2.
glass ,engraved or etched by any process
玻璃,经任何工艺雕刻或蚀刻
3.
Shallow Etching Rate and Roughness of Etched SiC Surfaces
SiC材料的低速率浅刻蚀工艺研究
4.
PROCESS PARAMETERS DETERMINATION OF ETCHING LITHOGRAPHY SERVO DISK BY HF SPUTTERING
利用高频溅射刻蚀光刻伺服盘工艺参数的确定
5.
The resolution of an etching process is a measure of the fidelity of pattern transfer.
刻蚀工艺的分辨率是图形转移保真度的量度。
6.
APPLICATION OF ION BEAM MILLING TECHNIQUE TO JOSEPHSON DEVICE TECHNOLOGY
离子束刻蚀技术在约瑟夫逊器件工艺中的应用
7.
Experimental Study on Excimer Laser Electrochemical Etching Process of Silicon;
准分子激光电化学刻蚀硅工艺实验研究
8.
Challenges on Oxide Etch with 193nm Photoresist;
193nm光阻对于绝缘体材料刻蚀工艺的挑战
9.
The Study of the Etching Process with RF Cold Plasma at Atmospheric-pressure;
常压射频冷等离子体在刻蚀工艺中的应用研究
10.
A New Technology for Production Basic Copper Carbonate from Waste Etching;
利用含铜蚀刻废液合成碱式碳酸铜新工艺研究
11.
Technics for Producing Bluestone from the Waste Liquid Engendered from the Etching of Circuit Boards;
从刻蚀电路板废液中制取硫酸铜的工艺研究
12.
Inductive Couple Plasmas Etching Processing of InSb Wafer
电感耦合等离子体刻蚀InSb芯片工艺的研究
13.
STUDY ON LASER GROOVING AND CHEMICAL ETCHING PROCESS FOR EWT BACK CONTACT SOLAR CELL
EWT背结电池中的激光刻槽及腐蚀工艺的研究
14.
Abstract: Based on ash chamber of metal etch, this paper describes the full process of dry clean development and evaluation.
本文以金属刻蚀去胶腔为背景，简述干刻清洗工艺开发和评价过程。
15.
Responsible for Implant /Diffusion/ Etch/ Photo new process development, process in-line control and development.
负责注入/扩散/刻蚀/光刻新工艺的开发及在线控制。
16.
Mary is very keen on etching.
玛丽很喜爱蚀刻艺术。
17.
In one variant of this process the bumps are etched onto the tape rather than deposited on the wafer.
这种工艺有一种方式是，凸出物被蚀刻在带上，而不是沉淀在硅片上。
18.
Novel Centrifugal Extraction-stripping Process-Treating Spent Etchant from Printed Circuit Board Industry Environmentally Friendly;
离心萃反联合新工艺—环境友好处理印制线路板蚀刻废液