1.
Finite Element Mechanics Models of Combined Bending and Forming TC4 Sheet
组合弯曲成型TC4板材的有限元力学模型
2.
Microstructure and Bending Deformation Behavior of Fe-based Infiltrated Layer on Copper Substrate
铜合金表面铁基渗层组织与弯曲行为
3.
Flexural Behaviour of Multi-Span GFRP-Concrete Hybrid Beams
多跨GFRP混凝土组合梁的弯曲性能
4.
Analysis of Moment-curvature Hysteresis Behavior of Composite Beams
组合梁截面弯矩—曲率滞回性能分析
5.
FE Analysis for Composite Slab Considering Sheet-Concrete Interface Friction
考虑界面摩擦影响的组合楼板弯曲有限元分析
6.
Experimental Study on Bending Behavior of Steel Box Epoxy Resin Concrete Composite Beam
钢箱-环氧混凝土组合梁弯曲性能试验研究
7.
ELASTIC BENDING AND STABILITY OF STEEL-CONCRETE COMPOSITE PLATE
钢-混凝土组合板的弹性弯曲及稳定性分析
8.
Experimental Study on Flexural Behavior of Multiplex Cementitious Steel-Bamboo Composite Slabs
复合胶结型钢—竹组合楼板弯曲受力性能试验研究
9.
Numerical Analysis on Bending of Irregular Plates by Combining the Spline Subdomain Method and the Finite Strip Method
样条子域法和有限条法的组合解非规则板的弯曲
10.
Finite Element Analysis on Bending Behavior of Closed Profiled Sheeting-Concrete Composite Slabs;
闭口压型钢板—混凝土组合楼板弯曲受力性能分析
11.
The Simplified Formula for Calculating the Deflection of Steel-concrete Composite Beams and the Distortional Stability Analysis of Its Negative Moment Zone;
钢—混凝土组合梁挠度计算简化方法和负弯矩区的畸变屈曲分析
12.
Structure and Properties of Magnesium Alloy Sheets Undergoing Repeatedly Unidirectional Bending and Annealing
AZ31B镁合金薄板经单向多道次弯曲及退火后的组织与性能
13.
BUCKLING COEFFICIENT OF STEEL-CONCRETE COMPOSITE BEAMS IN NEGATIVE BENDING
钢-混凝土组合梁在负弯矩作用下的屈曲失稳系数研究
14.
STUDY ON FLEXURAL RIGIDITY OF STEEL-LIGHT WEIGHT CONCRETE COMPOSITE BEAMS WITH RE-ENTRANT TROUGH PROFILED STEEL SHEETING
钢-闭口型压型钢板轻骨料混凝土组合梁弯曲刚度研究
15.
Modelling Semi-Rigid Composite Joints with Precast Hollowcore Slabs in Hogging Moment Region
对翘曲弯矩区域内的预制空心板的半刚性组合节点建模
16.
Research on elastic deformation and flexural rigidity of the seal plate in the combination type slurry valve
组合式矿浆阀密封板的弹性变形和弯曲刚度研究
17.
Joining Convex (Outer) Curves to Concave (Inner) Curves
缝合凸出的弯曲部位和凹曲部位
18.
a twisty mountain road
一条弯弯曲曲的山路