1.
Further study aiming at the development of zincification techniques for magnesium alloy is needed.
但镁合金浸锌工艺值得做进一步的研究。
2.
Preliminary study on one-step zinc dipping process with electrochemical assistance
电化学辅助一步法浸锌工艺的初步研究
3.
Pretreatment Process and Electroplating on Surface of Magnesium Alloy
镁合金表面前处理浸锌工艺及电镀铝研究
4.
The adhesive force between the coating and the magnesium substrate can be improved significantly by using proper technique of zincification.
用浸锌工艺能较好地改善镀层与基体间的结合力。
5.
Effect of Impurities on Zinc Electrowinning Process in Alkaline Solution
碱浸-电解锌工艺中杂质对锌电积的影响
6.
Preparation technology of zinc chloride from acid leaching low-grade zinc ash in oxygen rich environment
富氧催化酸浸低品位锌灰制取氯化锌工艺研究
7.
Process and Property of Hot Dip Zn-Ni Alloy Coating for Reactive Steel
活性钢热浸锌镍合金镀层工艺与性能
8.
Improvement Improvement of Hot Dip Galvanizing Techniques for Threaded Type of OCS Fittings
螺纹类接触网零件热浸镀锌工艺改进
9.
Study on Heap Leaching-Solvent Extraction-Electro-deposit of Low-grade Zinc Ore;
低品位锌矿堆浸—萃取—电积工艺研究
10.
Study on Pressure Acid Leaching Technique of a Refractory High Silicon Zinc Oxide Ore
某难处理高硅氧化锌矿加压酸浸工艺
11.
Impact of technologic condition selected for roasting zinc concentrate on recovered ratio of total sulfur and zinc in hydro-metallurgical extracting zinc
锌精矿焙烧工艺条件对湿法炼锌总硫利用率及锌浸出率的影响
12.
Basic Research and Technical Study on Bioleaching of Zinc Sulfide Ore Bearing High Content of Iron;
高铁锌硫化矿的细菌浸出基础及其工艺研究
13.
Study on Technology and Kinetics of Mechanical Activation Enhancing Leaching Indium from Hard-Zinc;
机械活化强化硬锌渣浸铟工艺及动力学研究
14.
Leaching-Extraction Process of Low-Grade Zinc Oxide;
低品位氧化锌矿浸出萃取工艺基础研究
15.
Design Application of Zinc Sulfide Pressure Leaching Process in Hydrometallurgy
硫化锌加压浸出工艺在湿法冶金中的设计应用
16.
Research on the Process for Extracting Indium from Zinc Oxide Flue Dust by Pressure Oxidation Leaching
含铟锌渣氧粉加压氧化浸铟的工艺研究
17.
Application of high temperature and high-acid leaching in conventional zinc hydrometallurgy process
高温高酸浸出在传统炼锌工艺中应用的研究
18.
Improvement of heat treatment and hot-dip galvanizing process for 42CrMo steel multisection draw-bar
42CrMo钢多节拉杆热处理及热浸镀锌工艺改进