1.
METHOD TO CALCULATE LOAD DISTRIBUTION AMONG WHEELS FOR THE SIX-WHEELED LANDING GEAR
六轮小车式起落架机轮载荷分配研究及计算方法
2.
Impact of Roughness of Airport on Tricycle-type Landing Gear Wheel Load Distribution
机场不平度对小车式起落架前后机轮载荷分配影响
3.
Research on Dynamic Simulation for Dropping of Landing Gear and Landing of Aircraft;
小车式起落架落震及全机着陆动态仿真分析
4.
Parameter Analysis and Optimization of Six-Wheeled Rocker Lunar Rover;
六轮摇臂式月球车悬架的参数化分析及优化
5.
gantry crane with jib crane
带臂架小车的门式起重机
6.
A method for kinematics modeling of rock-er--bogie mode lunar rover with 6 wheels is described inthis paper.
给出了六轮摇臂—转向架式月球探测车的运动学建模方法。
7.
The Design and Analysis of a Six-Wheeled Rover Folded-Deployed Suspension
六轮探测车折叠可展悬架设计与分析
8.
non-axial type gear
无轴式传动装置[起落架]
9.
Analysis of Aircraft Taxiing-induced Response with Multiple Wheels and Multiple Landing Gears;
多轮多支柱起落架飞机滑跑响应分析
10.
A Research on the Processing Technique of 300M Aircraft Landing Gear Steel Axle
飞机起落架300M钢轮轴加工工艺研究
11.
Workers often jack up a car to change a tyre.
工人经常用起重机架起汽车换轮胎。
12.
Check visually if gear and tyre are intact, do not retract the landing gear until fire is out.
请目视检查起落架及轮胎是否完整无损，火熄灭后才收上起落架。
13.
Opitimization of 160t/50t metallurgy bridge crane's trolley frame
160t/50t冶金桥式起重机小车架的结构优化
14.
The Small-Scale Wheeled Sugarcane Harvester s Comprehensive Research and the Whole Frame s Design and Analysis;
小型轮式甘蔗收获机总体研究及车架的设计分析
15.
Dynamics modeling and simulation of a lunar rover with six cylindrical wheels
六圆柱轮式月球车动力学建模与仿真
16.
raise/lower the undercarriage
收起[放下]起落架.
17.
The solid axle suspension uses a solid steel dead axle( does not turn with wheels) with a leaf spring at each side.
非独立悬架使用整体式车桥(能与车轮一起转动)两侧用钢板弹簧连接。
18.
Reason Analysis of Crack in an Aircraft Right Undercarriage Wheel Axle
某型飞机右起落架轮轴裂纹产生原因分析