1.
Practice on Technology Process for Replacing Side Carbon Block for Aluminium Smelting Pot of GL190kA Series without Stoppage
GL190kA铝电解槽系列不停槽更换侧部炭块工艺的实践
2.
Application of shut-off and restart-up technology when 306kA aluminium reduction cell with power
306kA铝电解槽不停电停、开槽技术的应用实践
3.
The latter shall not be applicable for normal shutdown for spare part replacement and maintenance.
后者不适用于备件更换和维修的正常停车。
4.
REPLACE PARK NEUTRAL SWITCH.
更换停车空档开关。
5.
Position the slot located in the upper end of replacement grille at the exhaust port and insert edge in the slot.
固定位于排气窗处的更换格删上部末端的槽并且将边插入到槽中。
6.
quick change drilling chuck in process
不停车快换钻攻夹具
7.
The machine has automatic tool change and automatic work transfer so that workpiece can be loaded/unloaded while the machining is in process.
由于机床能够自动更换刀具和自动加工转换,工件可在不停机的情况下上机或下机。
8.
Generator Stator Wedge Replacement and Analysis of Core Corona Corrosion Treatment
发电机定子槽楔更换及铁芯电晕腐蚀处理浅析
9.
Optimized model and template for anode exchange sequence of prebaked anode cell
预焙槽阳极更换顺序表的优选模型和模板
10.
A blackout was out of the question.
更不用说全面停电了。
11.
so there's no refund and no exchange for it.
所以，不能退款，不能更换。
12.
to fail to inform the Customs of the arrival and departure time of a means of transport and the place where it will stay or any change of such a place;
不将进出境运输工具到达的时间、停留的地点或者更换的地点通知海关的；
13.
Upper cutter roller holder and upper line pressing roller holder are controlled pneumaticaly, so there is no need to cut paper board and stop for order change.
上刀?座与上压线?座升降以气压方式控制，故在更换订单时不必切断纸板及停机.
14.
When change stacking pallet, it is with Temporary stock device, operator has plenty time, it is not necessary to reduce machine speed or stop machine.
更换堆叠栈板时，备有暂存装置，操作人员作业时间充裕，机器不必减速或停机。
15.
Moving from job-to-job, or "job-hopping", as it is called, is quite acceptable in the United States.
经常更换职务，也就是一般所谓的“跳槽”，在美国是被认为可行的。
16.
Eliminates changing heavy bottles
不需要更换笨重的瓶子
17.
Exchange of unequal values makes the poor countries poorer.
不等价交换使穷国更穷。
18.
Numerical control, however, offers more flexibility, lower tooling cost. Quicker changes, and less machine down-time.
然而，数控技术更灵活，装配机床的花费更少，更换更快，而且停机维修时间更短。