1.
Compensation Control Model of Strip Head Thickness in Unsteady Rolling State
非稳态下带钢头部厚度补偿控制模型
2.
The uncoiler and pinch rolls work together delivering the strip end to the shear.
开卷机及夹送辊同步工作送带钢头部至剪切机。
3.
The tail end of the previous coil is cropped. The tail end of previous coil and leaving end of next coil is put in the welder and welded.
前一卷带钢的尾部经剪切后与后一卷带钢的头部在焊机进行焊接
4.
Analysis on cracking at head of tensile sample of hrb335 hot rolled ribbed bars
HRB355热轧带动肋钢筋拉伸试样头部开裂分析
5.
copper headed nail of iron or steel
带铜头的钉,铁或钢制
6.
hook nail of iorn or steel, copper-head
带铜头的钩钉,铁或钢制
7.
strip-steel head and tail configuration measuring instrument
带钢头尾形状测量仪
8.
Cadres must set an example in observing discipline and abiding by the law
干部应带头遵纪守法
9.
hook nail of iorn or steel (excl. copperheaded)
钩钉,铁或钢制（不包括带铜头的）
10.
Improvement of Steel Wire Rope Core Belt Lacing Lap Joint Craftwork
钢丝绳芯输送带接头搭接工艺的改进
11.
Design on Time Monitoring and Measuring System of Steel Cable Belt Connector
钢绳芯输送带接头实时监测系统设计
12.
Hexagon bolts with wire holes on head--Reduced shank--Product grade B
GB/T32.2-1988六角头头部带孔螺栓细杆B级
13.
" Bolts, small hexagon head with fit neck and holes through the head"
GB/T26-1976小六角头头部带孔导颈螺栓
14.
Hexagon bolts with wire holes on head--Product grade A and B
GB/T32.1-1988六角头头部带孔螺栓A和B级
15.
Hexagon bolts with slot on head--Product grade A and B
GB/T29.1-1988六角头头部带槽螺栓A和B级
16.
" Bolts, small hexagon head with holes through the head"
GB/T25-1976小六角头头部带孔螺栓
17.
"After the coil is put on uncoiler, the uncoiler starts, putting the leading end of the coil into the flatterner, which clamp the strip. "
当原料卷完成上卷后,开卷机启动,将带头引至直头机,夹紧带钢。
18.
The Quality Control of Key Positions in the Civil Engineering of Masteel's 2250mm HR Strip Project
马钢2250mm热轧带钢土建工程关键部位的质量控制