1.
Extreme Overbalance Perforationg (EOP) Technique and Its Application in Carbonates.
超正压射孔工艺技术及在碳酸盐岩地层的应用
2.
Practice of Single-trip EOP Acidizing-DST Technology in Luojia 7 Well with High H_2S Content
高含硫罗家7井超正压射孔酸化测试三联作工艺技术实践
3.
Modified Formula of Formation Breakdown Pressure for Perforation Completions of Vertical Wells
射孔完井条件下地层破裂压力修正公式
4.
Study on Annulus Pressure Distribution after Perforation of Composite Perforators
复合射孔器射孔后环空压力分布试验研究
5.
Experimental Study on the Law of Jetting Boost Pressure in Hydrajetting
水力喷射孔内射流增压规律试验研究
6.
When the diffraction process is completed the overpressure loading on the front and back faces are essentially equal.
当绕射过程完成时，作用于正面和背面的超压荷载基本上相等。
7.
Appraisal of Underbalanced Perforation Technology and Deliverability;
负压射孔完井技术与产能的关系评价
8.
Study on Control System and Key Technologies of Pressing Powder for Perforating Charge;
射孔弹压药控制系统与关键工艺研究
9.
STUDY ON MECHANISM OF GAS AND LIQUID INTERACTION IN COMPLEX PERFORATION
复合射孔压井液运动及影响作用研究
10.
Research on Excess Pore Water Pressure Which is Induced by Jacking of PHC Pile;
PHC管桩沉桩引起的超孔隙水压力研究
11.
Application of high pressure water jet penetration perforation technology in Jiangsu Oilfield
高压水射流深穿透射孔技术在江苏油田的应用
12.
Productivity Evaluation by Finite Element Method and Underbalance Pressure Determination for Perforated Oil Wells in Naturally Fractured Reservoirs;
裂缝性油藏射孔完井产能有限元模拟及射孔负压研究
13.
Study on Ortho-rectification Methodology of Space-borne Synthetic Aperture Radar Imagery;
星载合成孔径雷达影像正射校正方法研究
14.
Finite Element Analysis of Forward Extrusion Cavity Die for Deep Hole and Thin Wall Shell
深孔薄壁件正挤压凹模的有限元分析
15.
RESEARCH ON MODELING TEST SIMULATOR FOR OIL FIELD SUPER-DEEP WELL PERFORATOR
油田超深井射孔器材测试模拟器的模型研究
16.
Injection of Marysan with Advanced Long Borehole in Soft Rock Stratum
在松软岩层中用超前长钻孔注射马丽散
17.
Ultramicro-pulverization mechanism of high pressure jet homogenizer
高压射流均质机的超微粉碎机理研究
18.
Design of Ultra-high Pressure Water Jet Pump Package System for Hull Rust Removal
船舶除锈超高压水射流泵组系统设计