1.
The Effect of Integral Key Fit Clearance beyond the Tolerance of Rolling Mill Screw-down Motor on Service Performance of Rolling Mill
轧机压下丝杆花键配合间隙超差对轧机使用性能影响的分析
2.
double-column screw type supercharge device
双柱丝杆式加压装置
3.
Strut-and-tie Model of Deep Beam Design Under Uniform Distributed Loads
均布荷载下深梁设计的压杆-拉杆模型
4.
The Research of Intelligent Design for Filature Screw Extrusion Machine & Expert System;
纺丝螺杆挤压机智能设计与专家系统研究
5.
Tighten needle bar connection screw 2 in needle bar connection 3 so that the marker line of the needle bar aligns with the bottom end of needle bar lower bushing 1 at the lowest position of the needle bar.
在针杆最下点，让针杆下金属部件1对准针杆的刻线，然后拧紧针杆套筒3紧固螺丝2。
6.
self-contained wireline gauge
自足式钢丝起下井底压力计
7.
STUDY OF THE PRESS SCREW REVERSED-SPINS IN 1150 BLOOMER
1150初轧机压下螺丝回松的研究
8.
The mast snapped off under the pressure of the wind.
在风的压力下，桅杆喀嚓一声断了。
9.
a lever that actuates a mechanism when depressed.
下压时可以开动机械装置的杠杆。
10.
The rail of the fence gave under his weight
围栏的横杆在他的重压下突然塌了下来。
11.
When discharging, the motor operates, hydraulic cylinder charges pressure, push rod (piston rod) draw back, the valve plate connected with push rod opens, the materials are discharged.
当需要卸料时，电机运转，液压缸增压，推杆（活塞杆）收回，和推杆连接的阀板开启，物料卸下。
12.
nuts of an anchor
有杆锚杆孔上下的杆箍
13.
A method of prolonging the life of adjusting screw in rolling mill
提高轧钢机压下丝杠螺纹副寿命的设计
14.
Illustrated below are some commonly accepted positions of the lever and weight.
下图是常见的、能够接受的操纵杆和压铁位置。
15.
Dynamic Analysis of Piezoelectric-Elastic Layered Bar Under Longitudinal Impulse
纵向脉冲作用下压电层合杆的动力分析
16.
Buckling of compressed bar subjected to combined effect of axial loads considering shear deformation
考虑剪切变形时轴向载荷联合作用下压杆屈曲
17.
Application of Pressure Bolting Supporter Under the Influence of Small Coal Mining Pillar Roadway
采动影响下小煤柱巷道让压锚杆支护的应用
18.
Buckling of round variable section compression bars with one side fixed and another place elastic supports
下端固接上端弹性支承变截面压杆的屈曲