1.
Self-organized fabrication of anodic aluminum oxide with dissimilar pores in external surface
外表面不同孔结构的阳极氧化铝模板的自组织制备
2.
Preparation and performance of titanium phosphate with different mesoporous structure
不同介孔结构的磷酸钛的制备及性能
3.
A comparison of crystallite and pore structures in different polyacrylonitrile-based carbon fibers
不同PAN-CF的微晶及孔结构对比
4.
Influence of pore-enlarging methods on the structure of Al_2O_3/CC
不同扩孔方法对Al_2O_3/堇青石载体结构的影响
5.
Effect on Particle Structure of Porous Cornstarch by Different Cross-linkage Treatment
不同交联处理对玉米多孔淀粉颗粒结构的影响
6.
EFFECTS OF PHOSPHORIC ACID ACTIVATION PROCESSES ON PORE STRUCTURES OF ACTIVATED CARBONS
不同磷酸活化工艺过程对活性炭孔结构的影响
7.
Study on mechanical properties of silicone rubber foam with different pore structure
不同孔隙结构的硅海绵材料及其力学性能研究
8.
The configuration of the pore space is different from that which would be obtained from the packing of uniform spheres.
自然界物质孔隙结构与均匀球粒的堆积而形成的孔隙是不同的。
9.
The structural form, inner pore distribution, and burning behavior of pulverized coal with different particle size have been tested.
对不同粒度煤粉的结构形态、孔分布和燃烧特性进行了试验。
10.
Carbon matrices with different pore structures as heat transfer intensifier in paraffin wax/carbon thermal energy storage system
不同孔隙结构的炭材料作为石蜡相变储能材料强化传热载体
11.
Propane Oxidative Dehydrogenation over Vanadia Catalysts Supported on Silicas with Different Pore Structures
不同孔道结构的氧化硅负载钒氧化物催化丙烷氧化脱氢
12.
Pore structure of Chang 6 reservoir group in different mi-crofacies reservoir at Xinghe area in Ordos basin
鄂尔多斯盆地杏河地区长6油组不同微相储层孔隙结构特征
13.
According to the test results of seven2 D deep outlet models with different reinforced ways, the structure characteristics of the deep outlet under various loads are studied.
通过7种不同配筋方式的钢筋混凝土孔口断面模型试验,探讨了大坝孔口的结构受力特征。
14.
The key for isobutane dehydrogenation is to synthesize non-noble mental catalysts.
详细总结了不同载体和助剂对脱氢反应的影响,尤其是载体和助剂的酸碱性以及载体的孔结构。
15.
Study on Absorption Characteristics of Multihole Structure on Surface of Stainless Steel
不锈钢表面多孔结构的吸收特性研究
16.
Fig.7 The thick vertical system, showing the structure of holes in various directions( long arrow) and the strip of protrusion( arrow).
图7粗垂直线系统,示不同方向的孔洞结构(长箭头)及细丝上的条状凸起(箭头)。
17.
The effect of mechanics of different pore former on the properties of low weight high insulation sintering product
不同成孔机理造孔剂对轻质保温烧结制品性能的影响
18.
The Effect of Mechanics of Different Pore Former on the Properties of Fly-ash and Shale Sintering Product
不同成孔机理造孔剂对粉煤灰页岩烧结制品性能影响