1.
Analysis of Calculation Model for Spray Characteristics of Pressure Swirl Nozzles
压力涡流喷嘴雾化特性模拟的双相流模型分析
2.
The Research of Adopting Variable Nozzle Ring by Axial-flow Constant Pressure Turbocharger of Ships ;
船用轴流式定压涡轮增压器采用可变喷嘴环的研究
3.
Three Dimensional Numerical Simulation on Single Atomizer Blend Flow Pressure Spray Dryer;
单喷嘴混流压力式喷雾干燥塔三维数值模拟
4.
Study on Status of Force Acting on VNT Guide Vanes Under Different Engine Working Conditions
内燃机增压器可调涡轮喷嘴环叶片受力状态研究
5.
Research on External Flow Field of Pressure Swirling Nozzles under Different Wind Speeds
轴流风速下压力旋流喷嘴外流场特性研究
6.
A high-velocity fluid stream forced under pressure out of a small-diameter opening or nozzle.
喷射流体在压力迫使下从小喷嘴或小孔中喷出的高速流体
7.
Study on Gas Separation Performance of Vortex Tube with Supersonic Inlet Nozzles
超音速喷嘴涡流管气体分离性能研究
8.
Experimental study on the vortex tubes with different Mach number nozzles
喷嘴马赫数对涡流管性能影响的实验
9.
Study on the Bottom Hole Pressure Properties of the Oscillating Pulse Jet-Nozzled Bit
振荡脉冲射流喷嘴钻头井底压力特性研究
10.
Effect of VNT Nozzle Opening on Performance and Emissions of an Automotive Diesel Engine;
可变喷嘴涡轮增压器喷嘴截面积对车用柴油机性能的影响
11.
Simulative Research with the Impact on the Injection Rule of Rail Pressure Fluctuations in High-pressure Common-rail System
压力波动对喷嘴内流场及喷油规律影响的仿真研究
12.
Experimental Research on Pneumatic Torque of Adjustable Turbine Nozzle Guide Vane
可调涡轮喷嘴导流叶片气动转矩的试验研究
13.
CFD Simulation of High-Pressure Water Descaling Nozzle Jet Characteristic;
高压水除鳞喷嘴射流特性的CFD仿真
14.
Research of the Approach for Designing the Scroll-Nozzle's Vanes of Radial Inflow Turbine Based on Lower Flow Loss Function Figure;
径流式涡轮喷嘴环低流损函数叶片设计方法研究
15.
Matching and Optimizing of Diesel Engine for Omnibus with Variable Nozzle Turbocharger;
公交车用柴油机与可变喷嘴涡轮增压器的匹配与优化
16.
Measure Methods of Spray Distribution in Radial Direction of Pressure Atomization Nozzle
压力式雾化喷嘴径向喷淋密度的测量方法
17.
Experimental Study of Hydrajet Nozzle on Abrasion
水力喷砂射孔压裂喷嘴的损伤试验与分析
18.
CFD Analysis for Effect of Injection Pressure Fluctuation on Cavitating Flow in Diesel Engine Nozzle
喷油压力波动对喷嘴内空穴发展影响的CFD分析