1.
Study on box deep drawing formability of tailor rolling blanks using variable blank holder force
变压边力对连续变截面辊压板成形性能的研究
2.
variable crown roll
连续改变辊凸度的轧辊
3.
Construction Technique of Continuously Changing Hight Prestressed Concrete Beam 0 #;
变截面预应力砼连续梁0#块的施工
4.
Finite Element Analysis of Skewly-Supported Continuous Box Girder Bridge with Variable Section;
斜交变截面连续箱梁桥的有限单元法
5.
Technology and Equipment for Continuous Rolling 50000 m~3/a Medium Density Fiberboard Production Line
年产5万m~3连续辊压薄型中密度纤维板生产线的工艺与设备
6.
The equation of five moments of continuous beam with step cross section on the elastic support
阶梯状变截面弹性支座连续梁的五弯矩方程
7.
ANALYSIS OF CURVED CONTINUOUS BOX-GIRDER BRIDGES WITH VARIOUS PLATE THICKNESS BY DOUBLE SPLINE SUBDOMAIN METHOD
双样条子域法分析变截面连续弯箱梁桥
8.
STATIC ANALYSIS OF STRAIGHT BOX GIRDER BRIDGES BY SPLINE SUBDOMAIN METHOD
双样条子域法分析等高度变截面连续直箱梁桥
9.
Shear Lag Effect Analysis in Box Girder of a Continuous Rigid-Frame Bridge with Varying Depth;
连续刚构桥变截面箱梁剪力滞效应分析
10.
Computing Analysis of Principle Stress of Continuous Variable Section of Beams and Reasoning and Proving of Its Formula;
关于连续变截面梁主应力计算分析与公式推验
11.
On construction technology of suspending irrigated variable cross-section prestressed continuous box-girder bridge
悬浇变截面预应力混凝土连续箱梁桥施工技术
12.
The cantilever construction technique of variable cross-section prestressed concrete continuou box-girder
变截面预应力混凝土连续箱梁的悬臂施工技术
13.
STUDY ON CALCULATION OF THE ECCENTRIC-LOADED COEFFICIENTS OF THE VARIABLE CROSS-SECTION CONTINUOUS CONCRETE BOX-BEAM
变截面连续箱梁桥偏载增大系数的计算研究
14.
Vibration Analysis of Multi-span Continuous Beam Bridges with Non-uniform Cross Section Under Moving Vehicles
多跨变截面连续梁桥在车辆通过时的振动分析
15.
Constructions of Grooves on the Roll-surface of CMS
连续混炼双辊机辊筒表面凹槽的结构形式
16.
The compressive force exerted by the rollers causes the metal to deform. The metal is thus reduced in section, increased in length and finally changed in shape.
轧辊施加的压力使金属变形。金属的截面减小，长度增加，从而改变形状。
17.
CVC roller system (continuously variable crown roller system)
连续可变锥度轧辊系统（德国蒙福茨制）
18.
Variable Hydraulic Stiffness in the Gauge Control for a Tandem Cold Mill;
冷连轧机辊缝控制的液压变刚度问题