1.
Analysis on gauge deviation due to flattening force difference and countermeasures
热轧平整压力导致厚度不合的分析与对策
2.
Analysis of Unqualified Cause of Thick Gauge High Strength Steel Plate in Ultrasonic Flaw Detection
厚规格高强度钢板探伤不合原因分析
3.
Proper frequency and amplitude for different soil and layer depth.
适宜的振幅、动频率,适合不同土壤和铺层厚度。
4.
Study on Annealing Behaviors of Ta-2.5wt%W Alloy Foil with Different Thickness
不同厚度Ta-2.5wt%W合金箔材退火行为的研究
5.
Spine-bulk: The thickness of the spine of a book block not including the thickness of the cover boards.
脊厚:书芯厚度,它不包括书皮纸板的厚度。
6.
Two different ice thickness and five differenttrigent angles of Watr line are adopted.
实验中进行2种不同冰厚度和5种不同水线切线角的组合。
7.
Erosion Restoration of the Major Cenozoic Unconformities in the Xihu Depression of the East China Sea
东海西湖凹陷新生界主要不整合面地层剥蚀厚度恢复
8.
Restoration of eroded strata thickness in Cretaceous/Jurassic unconformity in hinterland of Junggar Basin
准噶尔盆地腹部白垩系/侏罗系不整合地层剥蚀厚度的恢复方法
9.
Study on the Behavior of Rigid Pile Composite Ground with Different Cushion Thickness;
不同厚度褥垫层刚性桩复合地基工作特性的研究
10.
Research on the Technology and Performances of Structural Plywood Made of Pinus Massoniana Veneer with Different Thickness
马尾松不同厚度单板制造结构胶合板工艺技术及性能研究
11.
High-precision Vision Measurement on Composite Material and Instability Analysis and Processing
复合材料高精度视觉测厚与不稳定因素的分析与处理
12.
Effects of Temperature and Alloy Element on Hot-dip Aluminizing Process for Decreasing Fe-Al film Thickness
不锈钢热浸镀铝中温度及合金元素对膜厚的影响
13.
Reasonable Mining Height of Full-mechanized Caving Mining in Softly Inclined and Extra-thick Coal Seam
缓倾斜特厚煤层综放开采合理开采厚度的确定
14.
The Rational Position and Thickness of Semi-rigid Base in Asphalt Pavement
半刚性基层合理层位与合理厚度研究
15.
Input keyway thickness excluding taper.
输入键沟的厚度（不包括锥度）。
16.
Instantaneous Reflectivity of Ni-Fe Alloy Single Layer Film and Its Composite Films with Different Thicknesses Excited by Femtosecond Laser
飞秒激光作用下不同厚度镍铁合金单层膜及其复合膜的瞬时反射率
17.
REASON ANALYSIS ON INCOMPETENT ELONGATION OF LOW-ALLOY MEDIUM PLATE
低合金中厚板延伸率不合的原因分析
18.
Experimental analysis on thickness control of variable thickness composite laminates during autoclave process
变厚度复合材料热压罐工艺层板厚度控制的实验研究