1.
Judge and Put Up Edge Layout and One Die Forming for the Complex Shape Stamping Parts
裁搭边排样与复杂形状冲压件的一模成形
2.
In the forming operation of stamping a complex shape, draw-wall wrinkling means the occurrence of wrinkles in the die cavity.
在冲压复杂形状之间时，拉伸壁起皱就是在模具型腔中形成的起皱。
3.
Study of the Application of Reverse Engineering in Complex Stamping Parts and Die Design;
反求工程在复杂冲压零件及成形模具设计中的应用研究
4.
Software Development of Unfolding of Stamping Complex Parts Based on NX Platform;
基于NX的复杂冲压件坯料展开的软件开发
5.
Pressure bump prevention and control technology for use in thick coal seams under complicated geological conditions in deep mines
大采深厚煤层复杂条件下冲击地压防治技术
6.
Pressure Performance Analysis of Arbitrary Shaped Reservoirs with Boundary Element Method;
复杂形状油藏压力动态分析的边界元方法
7.
Research on the Turning-forming of Thin and Complicated Contour Surface;
复杂曲面、薄壁件精密旋压成形技术研究
8.
Title in EnglishThe Simulation of Complex part cold extrusion and optimizion of process
复杂件冷挤压成形数值分析和工艺优化
9.
Study on the Key Technologies of KBE Based Process Planning for Large Complicated Stampings;
基于KBE的大型复杂冲压件工艺设计关键技术研究
10.
Numerical simulation of electromagnetically assisted sheet metal stamping for cylindrical deep drawing
筒形件磁脉冲辅助冲压成形数值模拟
11.
Research of Automated Ultrasonic Non-Destructive Test of Large Complex Geometry Composite Structures in Aeronautic Industry;
大型航空复杂形状复合构件自动化超声无损检测研究
12.
Based on the reduced scale ring rolling and finite element simulation, materials axial transferring pattern was studied and a formability evaluation method was proposed including the shape factor.
研究了大型复杂环件形状因素和轧制速率对成形性能的影响规律。
13.
Research on Numerical Simulation Modular Organization for Deep Drawing Process of Complex Shape Cover Body;
复杂形状汽车覆盖件成形过程数值仿真模式的研究
14.
Study on Microstructure and Properties of Complicated Shape Disk of FGH95 PM Superalloy
复杂形状FGH95粉末盘形件固溶处理组织及性能研究
15.
Hot forming process optimization of a complex titanium alloy part with numerical simulation method
复杂形状钛合金热成形零件工艺仿真及参数优化研究
16.
Research on Press Forging Forming for the Positioning Pin in Metal Stamping Part
五金冲压件中定位柱的冲锻成形研究
17.
Abstract: Reed valve, high-speed and complicated in shape, is one of key parts in microengine.
文摘:高速复杂形状簧片阀是微型发动机关键零件之一。
18.
Reed valve, high-speed and complicated in shape, is one of key parts in microengine.
高速复杂形状簧片阀是微型发动机关键零件之一。