1.
Double Nuts Anti-loosening link Assembly Screwing down Process Theoretic Analysis
双螺母防松时螺栓联接装配拧紧工艺的初步理论分析
2.
Place the new pump in position and tighten mounting bolts.
使水泵就位，拧紧装配螺栓。
3.
The application of fastening technology in cylinder head assembly
拧紧技术在发动机汽缸盖装配中的应用
4.
Install all fender screws finger-tight.
安装时用手指拧紧所有的挡泥板螺丝。
5.
Tighten locknut 1 to fix the thread stand.
拧紧固定螺母1不让线架装置松动。
6.
Tighten gear mounting bolts to specification.
根据规定拧紧齿轮安装皮带。
7.
Install the exhaust pipe support and tighten the screw.
安装排气管支架并拧紧螺丝。
8.
Install exhaust heat shield, tighten bolts to 11 N·m.
安装排气隔热罩，拧紧螺栓到11 N·m。
9.
Install the serpentine drive belt and tighten to obtain the specified tension.
安装蛇形驱动带，拧紧到规定的张力。
10.
chip on board process
基板上芯片装配工艺
11.
tighten up
密封, 拉紧, 拧紧
12.
This little tool is the very thing for turning stiff taps.
这个小工具正是用来拧过紧的旋塞。
13.
The plumber took out a wrench and tightened the bolt.
管子工拿出一把扳手拧紧了螺栓。
14.
A Virtual Assembly Process Information Model for Crossing Assembly Operations
面向装配工序交叉的虚拟装配工艺信息模型
15.
Integrate Planni of the Assembling Line for Loaders and the Process Layout;
装载机装配线的整体规划及工艺布局
16.
Research on the Assembly Process Planning Based on Solid Assembly Model;
基于实体装配模型的装配工艺规划的研究
17.
Assembly modeling method of digital assembly process system based on Pro/E
一种数字化装配工艺设计系统的装配建模方法
18.
Influence of Assembly Process on Repair Quality of Construction Machinery
装配工艺对工程机械维修质量的影响