1.
Double Nuts Anti-loosening link Assembly Screwing down Process Theoretic Analysis
双螺母防松时螺栓联接装配拧紧工艺的初步理论分析
2.
spring stop-nut locking fastener
弹簧防松螺母锁紧件
3.
Install adjuster nut and lock nut.
安装调节器螺母和防松螺母。
4.
A usually thin nut screwed down on another nut to prevent it from loosening.
防松螺母常指拧紧在另一个螺母上的防止其松动的细螺母
5.
a supplementary nut that is screwed down on a primary nut to prevent it from loosening.
旋在主要螺母外防止其松动的辅助螺母。
6.
The accident was due to the action of acid o the check nut.
事故是由于酸对防松螺母的作用而发生的。
7.
SLN self-locking nuts
SLN自动防松螺帽
8.
Recheck clearance on all valves again after locknut is tightened.
防松螺母拧紧后，再对所有气门的间隙重新检查一次。
9.
To Readjust- Loosen lock nut on the adjusting screw.
重新调节：松开调节螺丝上的锁定螺母。
10.
lock nut of iron or stee
锁紧螺帽,防松螺帽,铁或钢制
11.
Bolts and nuts are plated for corrosion resistance.
螺栓和螺母经过电镀防腐蚀处理。
12.
Tighten locknut 1 to fix the thread stand.
拧紧固定螺母1不让线架装置松动。
13.
The Research of Technology to Prevent from Looseness and Method of Testing for Thread Fastener;
螺纹紧固件防松技术和试验方法研究
14.
Normal, double-helix DNA is spiral, like a loosely coiled spring.
正常的双螺旋DNA是螺旋形的，像一根松松地卷曲的弹簧。
15.
Loosen setscrew 1 in the oil shield plate, and remove oil shield plate 2.
请拧松防油板固定螺丝1 ，然后卸下防油板2。
16.
" Self-locking nuts,twolug, anchor"
GB/T930-1988双耳托板自锁螺母
17.
" Self-locking nuts,twolug, anchor, sealing"
GB/T933-1988气密双耳托板自锁螺母
18.
" Boots for self-locking nuts,twolug, anchor"
GB/T940-1988双耳托板自锁螺母保护罩