1.
Free vibration and stability of multiple-step beams on elastic end supports and under stepped axial pressure
弹性支撑条件下分段轴压阶梯梁自由振动及稳定性分析
2.
Study on Nonlinear Dynamics of the Low-Pressure Rotor-Bearing System of 200MW Turbine Set;
200MW汽轮机组低压段转子—轴承系统非线性动力学分析
3.
Analysis of Axial Pressure of PET Bottle Based on ABAQUS
PET瓶基于ABAQUS的轴压分析
4.
A Study on Optimum Height of Axes Projection with Subsection Method for High-Rise Building
高层建筑轴线分段投测最佳高度研究
5.
Study of axes projection precision for super high-rise building based on subsection inner control method
超高层建筑分段投测轴线精度的研究
6.
Analysis on Optimization Design of Port Plate Pair of Axial Piston Pumps
直轴式液压轴向柱塞泵配流机构优化设计分析
7.
Compution on Pressure Distribution of Stern Bearing Liquid Film Reckoning in Inclination of Stern Shaft
计入艉轴倾角的船舶艉轴承液膜压力分布计算
8.
The Influence Analysis on Precision of Press Caused by the Diameter Deviation of the Crank Supporting Neck
曲轴支承颈的轴径误差对压力机精度影响分析
9.
section(al) roller
分节式压路机，分节路碾，环状轴
10.
Pressure Distribution of Gas Film and Dynamic Analysis for Gas Spindle
空气静压主轴气膜的压强分布与动态特性分析
11.
Intensity Analysis and Calculation of the Principle Shaft System Parts of Continuous Extrusion Machine;
连续挤压机主轴部件强度分析与计算
12.
The Static and Dynamic Characteristics of Gas Spindle Are Studies and The Structure Are Designed;
气浮主轴动静压特性分析及结构设计
13.
Analysis for Dynamic Buckling of Stainless Steel Pipe under Axial Impulsive Load Based on LS-DYNA;
基于LS-DYNA的轴压不锈钢管屈曲分析
14.
The Optimization of Hydraulic Bearing Rigidity and Essential Parameters;
液压轴承刚度与关键参数的优化分析
15.
Fracture Reason Analysis of Electro-motor Shaft Used in Vacuum Distillation Tower
蒸馏减压塔底泵电机轴断裂原因分析
16.
Strain Distribution Curves for Cement Concrete under Axial Compression
水泥混凝土轴心受压应变的分布曲线
17.
Analysis on the vibration characteristics of cracked beams subjected to axial force
轴向压力影响下裂纹梁振动特性分析
18.
Digital Analysis and Design of Crankshaft of a Reciprocating Compressor
往复式压缩机曲轴数字化分析与设计