1.
APPLIED TECHNOLOGY OF EXTERIOR INSULATION SYSTEM FOR OUTER-WALL WITH POLYSTYRENE BOARD AND STEEL-PLASTIC PLUGGING BOLT IN CAST-IN-PLACE CONCRETE FORMWORK
大模内置聚苯板钢塑复合插接栓外墙外保温系统应用技术
2.
The Research of the Fatigue and Creep and the Dowel-type Connections of Wood Plastic Composites;
塑木复合材料疲劳蠕变及其螺栓连接的研究
3.
The application of the lathedog connection technology about the steel-plastic composite pipe in coal mining
钢塑复合管道卡箍连接技术在煤矿井下的应用
4.
The part of a key that enters the lock and engages the bolt and tumblers.
插入锁中并使锁簧和制栓接合的部分。
5.
Welding of Stainless Clad Steel Plate 14Cr1MoR+347H
14Cr1MoR+347H不锈钢复合板焊接
6.
Introduction of the National Standard Steel-plastic Composite Pipe(Draft Standard for Approval)
《钢塑复合管》国家标准(报批稿)简介
7.
Application of steel mesh skeleton plastic (polyethylene) compound pipe
钢丝网骨架塑料(聚乙烯)复合管的应用
8.
Analysis on Stud Connectors in Steel and Lightweight Aggregate Concrete Composite Beams
钢-轻骨料混凝土组合梁栓钉连接件承载力分析
9.
Stress Analysis of Composite Laminate Connected by Preloaded Bolt
复合材料层合板预紧螺栓连接应力分析
10.
Specification for welding of stainless steel clad steel plate
GB/T13148-1991不锈钢复合钢板焊接技术条件
11.
Specification for welding of stainless clad steel in petrochemical industry
石油化工不锈钢复合钢焊接规程
12.
Study on Tightening Moment Test of Joint Bolt in Sandwich of Composites
复合材料夹层连接螺栓拧紧力矩试验研究
13.
To fit into a socket or mortise.
插入插座或与榫眼接合
14.
Research on Superplastic Diffusion Bonding of TC4 Titanium Alloy to 1Cr18Ni9Ti Stainless Steel;
TC4钛合金与1Cr18Ni9Ti不锈钢超塑性扩散连接工艺研究
15.
The Intensity and Deformation Analysis of the Plastic Pipe with Steel Frame;
钢骨架增强塑料复合管的强度与变形分析
16.
Buckling Analysis of Plastic Pipe Reinforced by Winding Steel Wires under External Pressure;
钢丝缠绕增强塑料复合管外压失稳研究
17.
Development of Halogen-free Flame-resisting Special Materials for Steel Frame-plastic Complex Pipe;
钢骨架塑料复合管无卤阻燃专用料开发
18.
Study on Viscoelastic Behavior of Plastic Pipe Reinforced by Cross-Winding Steel Wire;
钢丝缠绕增强塑料复合管粘弹性力学行为研究