1.
Theory and Method of NC Machining for Globoid Indexing Cam;
弧面分度凸轮的数控加工原理与方法
2.
Studies on the CNC Prototype Machine Tool and Machining Process of Carbon Fiber Reinforced Plastics Cylindrical Component
复合材料筒形件数控加工原理样机与工艺研究
3.
Research on the Processing Principle and Technology Method of Numeric Control Boring of the Inner Spiral Surface;
内螺旋曲面数控镗削加工原理及工艺方法研究
4.
Study of Action Process and Control Principle of CNC Machining Center's ATC
数控加工中心自动换刀机构动作过程及控制原理研究
5.
Research on the Basic Kinematics-Geometry Theory and Tool Positioning Strategy for 5-axis NC Machining;
五坐标数控加工运动几何学基础及刀位规划原理与方法的研究
6.
Theory and Strategy of NC Machining Tool-path Planning for Vector Chinese Characters;
矢量汉字数控切削加工的刀具路径规划原理与方法
7.
The Geometric Theory of the Medial Axis Transform and Its Application to the NC Machining of 2.5D Pockets;
中轴变换的几何学原理及其在2.5D型腔数控加工中的应用
8.
Cutting Tool Radius Compensation of NC Processing and Coordinate Figure Computation of C Procedure Realization
C语言程序实现数控加工刀具半径补偿原理与坐标计算
9.
AT89C51-Based Circular Interpolation in the Remote NC Machining
基于AT89C51的圆弧插补原理在远程数控加工中的应用
10.
Size Reduction and NC Simulation of PDC Bit
PDC钻头的尺寸还原与数控加工仿真
11.
Research on Centralized Control of Numerical Control Processing and Management Technology of Processing Procedure;
数控加工集中控制与加工程序管理技术的研究
12.
Raw data: Data which has not been processed or prepared.
原始数据:未经加工或处理的数据。
13.
The technology processing in numerical control machining is discussed, several principles and methods of technology processing are presented.
文章主要对数控加工中的工艺处理问题进行了探讨,阐述了数控加工中工艺处理的若干原则和方法。
14.
Study on Rapid Moulding Process Based on Numerical Control Prototype;
基于数控加工原型的快速模具制造工艺研究
15.
Study on Post Processing and Programming Technology for Five Axis CNC Milling;
五轴数控铣削加工后置处理及加工编程研究
16.
Research of Key Technologies of Physical Simulation of NC Milling Machining;
数控铣削加工物理仿真关键技术研究
17.
Study on Accuracy Prediction of Physical Simulation of NC Machining;
数控加工物理仿真精度预测技术研究
18.
When numerical control punch press processing plate has the pad dregs reason brief analysis;
数控冲床加工板材时产生垫渣的原因浅析