1.
Analysis of Hydroelastic Responses of Very Large Floating Structure by Use of Sandwich Grillage Model.;
超大型浮体结构水弹性响应的梁板模型分析
2.
Abstract: A model of self-excited ae rodynamic forces acting on a sectionof bridge deck with additional surface atta ched below the trailing edge is established.
文摘:首先建立了下风侧附加翼板桥梁主梁截面的自激气动力模型。
3.
Research and Analyse on the Model Test of the Concrete Bridge Deck Slab of the Cable-Stayed Bridge;
斜拉桥混凝土主梁桥面板模型试验与分析
4.
CALCULATION MODEL OF INITIAL ROTATIONAL STIFFNESS OF STEEL BEAM-TO-COLUMN BOLTED END-PLATE CONNECTIONS
梁柱端板连接节点初始转动刚度计算模型
5.
Comparative analysis of large-scale high piled beam-slab structure wharfs between mathematical model and physical model
大型高桩梁板式码头数模计算与物模试验比较分析
6.
The Finite Element Method of Bridge Continuous Box Girder Beam and T Tepth Beam;
箱梁、T型断面梁的空间板有限元解法
7.
STUDY ON PARTIAL EFFECT OF PLATE SHELL AND BEAM ELEMENT UNDER ARBITRARY EXCITATION;
任意荷载激励下板、壳和梁单元结构及其组合模型的局部效应分析
8.
Model Test Study and Analysis on Torsion Effect and Distortion Effect of Box-girder with Corrugated Steel Webs;
波形钢腹板箱梁扭转效应和畸变效应的分析与模型试验研究
9.
Fundamental Restraining Model of Concrete Frame-Slab-Beam Structures under Temperature and Shrinkage Action;
混凝土框架梁板结构温度及收缩作用下的基本约束模型
10.
Ganged Formwork for Construction of Bowl-Shaped Concrete Box Girder and Applied Study on Support System
碗型混凝土箱梁施工组合模板及支撑体系应用研究
11.
Moment-Rotation Models of Semi-Rigid Composite Beam-To-Column Joints with Flush End Plate Connection
平端板连接半刚性梁柱组合节点的弯矩-转角模型
12.
Beam type gas injection packing support plate
梁型气体喷射式填料支承板、梁型气体喷射式填料支承板施工图
13.
Design for the Rack of 80T Three Beam Four-post Hydraulic Press
带顶模缸的三梁四柱液压机的立柱和梁板设计
14.
The simulation analysis of concrete box beam web plate stress
混凝土箱梁腹板受力状态的模拟分析
15.
Analysis of Compression Modulus of Resilience of Slab-Type Rubber Seat of Bridge
桥梁板式橡胶支座抗压弹性模量分析
16.
Application of π type steel girder in broken easy caving roof
π型钢梁在破碎易冒落顶板中的应用
17.
Researches and developes a new technique in making the U-Shape groove (include board of flank) in the main girder of the LD electric single-girder grane by cold bending;
LD型电动单梁起重机主梁U型槽(侧板)冷弯成型工艺的研究与开发
18.
card of pattern
装有几个模型的型板