1.
THE STRUCTURAL ANALYSIS OF THREAD LOCKED HEAT EXCHANGERS AND DIAPHRAGM HEAT EXCHANGERS
螺纹锁紧环换热器与隔膜密封换热器的结构分析
2.
Application of a new helix screw thread pipe heat exchanger
一种新型螺旋螺纹管式换热器的应用
3.
Screw thread shanks for thread forming screw--Metric coarse thread series
GB/T6559-1986自攻锁紧螺钉的螺杆粗牙普通螺纹系列
4.
Application of New Type Small Copper Tube with Inner Screw in Air Conditioner Heat Exchanger;
新型小管径内螺纹铜管在空调换热器中的应用
5.
Investigation and Development of Enhanced Tubular Heat Exchangers With C-276 Alloy
C-276合金螺旋波纹管高效换热器的研发
6.
Mechanical properties of fasteners--Thread forming screws--Metric coarse thread series
GB/T3098.7-1986紧固件机械性能自攻锁紧螺钉粗牙普通螺纹系列
7.
Tolerances for fasteners--Components for bolted connections made mainly from materials with a high temperature strength
GB/T3103.4-1992紧固件公差耐热用螺纹连接副
8.
"Screw: In machine construction, a usually circular cylindrical member with a continuous spiral rib or thread, used either as a fastener or as a force and motion modifier."
螺纹件: 机器结构中带连续螺旋肋的圆柱形件,用作紧固件或力和运动变换装置。
9.
Side view of hexagonal jam nut. Selection box height represents thread diameter.
六角锁紧螺母的侧面图。选择框高度代表螺纹直径。
10.
Align the bushing with the spring eye or shackle eye and tighten the nut at the socket wrench end of the threaded roTighten until the bushing is forced into the spring eye.
将衬套对准弹簧眼或U型钩眼，并在螺纹杆的套筒板手末端锁紧螺帽。锁紧直到衬套进入簧眼。
11.
Ivestigation on Flow Boiling Heat Transfer Characteristics of R290 and R404A in Horizontal Microfin Tube;
R290与R404A内螺纹管中沸腾换热研究
12.
To replace seat/ stem module shut off supply, loosen locknut and back off adjusting screw.
要更换阀座/杆模块，先关闭供应管道，松开锁紧螺母，退出调节螺丝。
13.
Mechanical properties of fasteners--Components for bolted connections made mainly from materials with a high temperature strength
GB/T3098.8-1992紧固件机械性能耐热用螺纹连接副
14.
Replace clean dustfilter and tighten screws
换上清洁的滤尘器, 拧紧螺丝
15.
CALCULATION OF HEAT TRANSFER AND FLOW RESISTANCE OF SPIRAL PLATE HEAT EXCHANGERFOR GAS-LIQUID
螺旋板式换热器气－液换热时流阻及传热计算
16.
Cold experimental study on the compact splitting-type returning ash heat exchanger of CFB boilers
循环流化床锅炉紧凑式分流回灰换热器冷态试验研究
17.
Evaporation heat transfer in smooth and internal grooved tubes;
水平光管和内螺纹强化管内换热性能的研究
18.
Evaporation heat transfer of R410A flowing inside horizontal smooth and internally grooved tubes
R410A在水平内螺纹管中沸腾换热实验研究