1.
Simulation Analysis on Liquid Steel Flow Field in Mold with 4 Holes Immersed Nozzle and Its Application in Casting Production
4孔浸入式水口结晶器钢水流场的仿真分析及其在连铸生产中的应用
2.
Clogging mechanism of submerged nozzle during Ca-treated steel casting
钙处理钢水浸入式水口堵塞成因分析
3.
The Research on Submerged Nozzle Nod in Continuous Casting Tube
浇铸管坯连铸用浸入式水口结瘤研究
4.
The study of water model research of SEN with rotational flow guide device
带旋流导向装置浸入式水口的水模型研究
5.
Experimental Research of Rotational Flow Guide Device in Submerged Entry Nozzle;
浸入式水口内旋流导向装置的实验研究
6.
Study of the Composition Carbon-Free Submerged Entry Nozzles for Continuous Casting of Clean Steel;
洁净钢连铸用复合无碳浸入式水口的研究
7.
The Study on the Composition and the Property of MgO-CaO-ZrO_2 Submerged Entry Nozzle;
浸入式水口用MgO-CaO-ZrO_2质材料的组成与性能研究
8.
Simulation Study and Application of the Submerged Entry Nozzles in Mold at Chonggang Slab Continuous Casters;
重钢板坏连铸结晶器浸入式水口研究及应用
9.
Effects of Additives on Properties of Al_2O_3-ZrO_2-C Submerged Entry Nozzle
添加剂对Al_2O_3-ZrO_2-C质浸入式水口性能的影响
10.
Numerical Modeling Study on a New Type SEN for Round Bloom Continuous Casting
大圆坯连铸用新型浸入式水口的数值模拟研究
11.
STUDY ON THE GEOMETRY OF SUBMERGED ENTRY NOZZLE FOR BLOOM CASTING
大方坯连铸结晶器浸入式水口结构研究
12.
Influence of SEN position on CSP mould flow field by water simulation
水模拟研究浸入式水口位置对薄板坯连铸结晶器流场的影响
13.
Application of quickly-changed SEN set on slab CCM
浸入式水口快速更换装置在板坯连铸机上的应用
14.
Study on Parameter Optimization of Submerged Entry Nozzle in Continuous Slab-Casting Mold;
板坯连铸结晶器浸入式水口工艺参数的优化研究
15.
Research on Properties and Microstructure of SEN for the Super Clean Steel Casting;
超洁净钢连铸用浸入式水口显微结构及性能的研究
16.
Application of Mould Immerging-type Spout Swift-replacing Equipment in Continuous Casting Production
结晶器浸入式水口快换装置在连铸生产中的应用
17.
Simulation Study and Industrial Practice of Double SENs in Beam Blank Mold
异型坯连铸双浸入式水口浇铸技术模拟研究及工业实践
18.
Uranium dioxide pellets Determination of density and amount of open and closed porosity Boiling water method and penetration immersion method??
二氧化铀芯块? 密度和开口孔及闭口孔的测定? 沸水法和渗透浸没法