1.
Structural Optimization of A Bolt-Flange Structure Based on Response Surface Design Method
基于多目标优化的螺栓-法兰连接结构尺寸设计
2.
double-studded flange
双头螺栓连接的法兰
3.
studded-flange connection
带柱螺栓的法兰连接
4.
Fillet welded;Screwed and plugged;Quick release;Flanged and bolted;Flanged and bolted 2
角焊;旋拧插塞式;速释;带法兰以螺栓固定;带法兰以螺栓固定 2
5.
"When bolting to steel flanges, longer bolts or stud may be required."
当用螺栓与钢法兰连接时,可能需要更长的螺栓或螺杆。
6.
Hexagon flange bolts-Product grade B
GB/T5787-1986六角法兰面螺栓--B级
7.
Hexagon flange bolts--Small series
GB/T16674-1996六角法兰面螺栓小系列
8.
Hexagon flange bolts--Reduced shank--Product grade B
GB/T5788-1986六角法兰面螺栓--细杆--B级
9.
Influence of Bolt Pretightening Force to GIS Shell Flange Intensity
螺栓预紧力对GIS壳体法兰强度的影响
10.
Research on Bolt Calculation in Forging Flanges Used in Steel Tube Tower
钢管塔锻造法兰连接螺栓的受力计算
11.
Bolts are ground and flange holes are calibrated for perfect centering of the two flanges in respect of each other.
螺栓经过打磨，法兰螺栓孔也经过校准，实现了2个法兰相互之间的完美对中。
12.
Hexagon flange bolts-Heavy series--Product grade B
GB/T5790-1986六角法兰面螺栓--加大系列--细杆--B级
13.
Tighten all bolts evenly as for a standard flange assembly.
均匀地紧固所有螺栓，形成标准的法兰总成。
14.
Sweat Solder adapter with Cover Tube and Cast Set Screw Wall Flange
焊接焊料适配器含盖管和铸造固定螺栓墙法兰
15.
Reliability of Analysis of the Primary Cylinder s Bolt Joint in Flange of the Hydraulic Press;
液压机主工作缸法兰处螺栓联接的可靠性分析
16.
Breaking Reason and Solution of the Connecting Bolts Used in the Ball Mill End Cover
球磨机端盖法兰连接螺栓的断裂原因及其解决
17.
Comparative evaluation of finite element models for mechanical structures with bolted joints
机械螺栓法兰连接的有限元力学模型比较研究
18.
The flange gasket bolts for the gate valves should be retightened during installation as the bolts may have loosened due to storage and shipping.
在安装期间，闸阀上的法兰垫圈螺栓应该重新紧固，因为在库存和运输时螺栓可能会松懈。