1.
Electron- beam Cladding Technology Equipment’s Research and Development of Numerical Control System
电子束熔覆工艺装备数控系统的研究
2.
THE APPLICATION OF ELECTRON BEAM MODIFICATION TECHNIQUE IN THE COATING CLADDING
电子束熔覆粉末涂层表面改性的研究
3.
Microstructure and Wear Resistance of(Cr,Fe)_7C_3/γ-Fe Alloy Cladding Layer Synthetized by VEB
真空电子束熔覆(Cr,Fe)_7C_3/γ-Fe合金层的显微组织和耐磨性
4.
plasma electron beam remelting
等离子 电子束重熔
5.
Experimental study on NiCrBSi multilayer coating cladded by micro-plasma arc cladding process
微束等离子多层熔覆NiCrBSi的试验研究
6.
EBFZM (Electron Beam Floating Zone Melting)
电子束悬浮区域熔炼
7.
The Crystal and Amorphous Phase in Cladding Layer by Compressed Arc Plasma Beam
压缩弧光等离子束熔覆层中晶相与非晶相
8.
Study on Crystallizing Procedure and HAZ by Plasma Beam Cladding;
等离子束熔覆结晶过程及热影响区的研究
9.
Numerical Simulation of Temperature Field of Plasma Cladding Fe-base Alloy
等离子束熔覆铁基合金温度场的数值模拟
10.
Numerical Simulation for Temperature Field of Electron Beam Melting Polysilicon
电子束熔炼多晶硅温度场的数值模拟
11.
Influence and Control of Electron Beam Remelting Coating on Crack
涂层电子束重熔对裂纹的影响及控制
12.
Microstructure and properties of part made by micro-plasma arc direct metal formation
微束等离子弧粉末熔覆金属成形件的组织及性能
13.
Direct Rapid Forming Study of Metal Parts Based on Micro-plasma Arc Cladding
微束等离子粉末熔覆金属零件直接快速成形研究
14.
Study of Conductive Line Preparation Directly Written by Laser Micro Cladding Electronic Pastes;
激光微细熔覆电子浆料柔性布线技术与设备
15.
Research on the Technology of Molybdenum Crystals of Refractory Metals Prepared by Electron Beam Floating Zone Melting;
难熔金属钼晶体的电子束悬浮区熔定向凝固工艺研究
16.
Using methods like electron beam melting or selective laser sintering.
使用方法如电子束熔炼或选择性激光烧结。
17.
The Forming Character of Electron Beam Freeform Fabrication
电子束熔丝沉积快速制造的成型与组织特征
18.
Mechanical Properties of Ti-6Al-4V Alloys by Electron Beam Melting
电子束熔融快速制造Ti-6Al-4V的力学性能