1.
Standard joint is a circular male and female configuration with a corrugated metal gasket.
标准连接是圆形外螺纹和内螺纹结构，配置波纹金属垫圈。
2.
Non-rising-inside screw stems are used in bronze and iron gate valves.
暗杆－内螺纹结构用于青铜和铸铁闸阀。
3.
Analysis of Screw Thread Structure of Drilling Stem with ANSYS
基于ANSYS的钻杆螺纹结构形式分析
4.
Finite element analysis of the screw structure of the drill-stem junction
钻杆接头螺纹结构形式的有限元分析
5.
Finite Element Analysis for Thread Structure of Explosion-protection Fan Leaf Stalk Used in Mine
矿用防爆风机叶柄螺纹结构有限元分析
6.
Rising stem-inside screw is the most common and preferred design for bronze multi-turn valves.
明杆－内螺纹结构对于青铜多回转阀门来说是最通用、首选的结构形式。
7.
Modal analysis of flange structure connected with screw bolts based on ANSYS
基于ANSYS的螺纹连接法兰结构模态分析
8.
Medium and high voltage, large capacitance, screw, high ripple current.
中高压，大容量，螺栓结构产品，能承受大纹波电流。
9.
"Face-to-face, centre-to-face, end-to-end and centre-to end dimensions of valves--Mals screw valves"
GB/T15188.4-1994阀门的结构长度外螺纹连接阀门
10.
" Face-to-face, centre-to-face, end-to-end and centre-to-end dimensions of valves--Female screw valves"
GB/T15188.3-1994阀门的结构长度内螺纹连接阀门
11.
THE METHOD OF DOUBLE-SUBSTRUCTURE IN THE STRESS ANALYSIS OF BOLT SCREW WITH INTERFERENCE FITTING
用二次子结构法对过盈螺纹进行应力分析
12.
Analysis of Preload, Stress, Rellability of Titanium Screw Joint Structure;
钛合金螺纹连接结构预紧力、应力、可靠性分析
13.
Failture Analysis of Drilling Collar Thread Connections and Structure Optimization
钻铤连接螺纹断裂失效分析及结构优化
14.
Slowdown system scheme and structural design for movable pipe-thread forming machine
可移式管螺纹成型机减速系统方案与结构设计
15.
Rising stem-outside screw and yoke is preferred in iron multi-turn valves.
明杆－外螺纹和支架结构是铸铁多回转阀门的首选结构。
16.
Study and Program Development on Contact Nonlinear Problem of Screw Pairs Joint;
螺纹副联接结构中接触非线性问题的研究与软件开发
17.
THE STRUCTURAL ANALYSIS OF THREAD LOCKED HEAT EXCHANGERS AND DIAPHRAGM HEAT EXCHANGERS
螺纹锁紧环换热器与隔膜密封换热器的结构分析
18.
The optimal design of the cutting thread shear type low-cost energy-absorbing structures for medium car
面向中级轿车的低成本螺纹剪切吸能结构优化设计