1.
FAILURE AND FINITE ELEMENT ANALYSIS OF INDIUM SOLDER-BUMPS FOR HgCdTe DETECTORS
HgCdTe探测器In焊凸点的失效及有限元分析
2.
The Research on a Low Cost Flip Chip Bumping Process by Stencil Printing
一种低成本倒装芯片用印刷凸焊点技术的研究
3.
motor-operated cam type flash welder
电动凸轮式闪光焊机
4.
Indicates concave, convex or flush welds. Increase height to fit above other weld symbol.
指示凹焊缝、凸焊缝或平焊。增加高度以配合其他焊接符号。
5.
electrode ,metal contact, for welding machines
电焊机金属接点焊条
6.
To achieve the required bump heights, the solder paste is over-printed onto the wafer bond pads.
为了获得要求的凸起高度，锡膏在晶片焊盘过焊。
7.
Hubbed slip-on-welding steel pipe flanges with raised face for PN 1.6MPa (16 bar)
GB/T9116.5-1988PN1.6MPa(16bar)凸面带颈平焊钢制管法兰
8.
Hubbed slip-on-welding steel pipe flanges with raised face for PN 10.0MPa (100 bar)
GB/T9116.10-1988PN10.0MPa(100bar)凸面带颈平焊钢制管法兰
9.
Hubbed slip-on-welding steel pipe flanges with raised face for PN 2.0MPa (20 bar)
GB/T9116.8-1988PN2.0MPa(20bar)凸面带颈平焊钢制管法兰
10.
Hubbed slip-on-welding steel pipe flanges with raised face for PN 2.5MPa (25 bar)
GB/T9116.6-1988PN2.5MPa(25bar)凸面带颈平焊钢制管法兰
11.
Hubbed slip-on-welding steel pipe flanges with raised face for PN 1.0MPa (10 bar)
GB/T9116.4-1988PN1.0MPa(10bar)凸面带颈平焊钢制管法兰
12.
Hubbed slip-on-welding steel pipe flanges with raised face for PN 5.0MPa (50 bar)
GB/T9116.9-1988PN5.0MPa(50bar)凸面带颈平焊钢制管法兰
13.
Hubbed slip-on-welding steel pipe flanges with raised face for PN 4.0MPa (40 bar)
GB/T9116.7-1988PN4.0MPa(40bar)凸面带颈平焊钢制管法兰
14.
Steel pipe welding neck flanges with male and female face for PN 10.0MPa (100 bar)
GB/T9115.21-1988PN10.0MPa(100bar)凹凸面对焊钢制管法兰
15.
Steel pipe welding neck flanges with male and female face for PN 15.0MPa (150 bar)
GB/T9115.22-1988PN15.0MPa(150bar)凹凸面对焊钢制管法兰
16.
Steel pipe welding neck flanges with male and female face for PN 2.5MPa (25 bar)
GB/T9115.18-1988PN2.5MPa(25bar)凹凸面对焊钢制管法兰
17.
Steel pipe welding neck flanges with male and female face for PN 4.0MPa (40 bar)
GB/T9115.19-1988PN4.0MPa(40bar)凹凸面对焊钢制管法兰
18.
Steel pipe welding neck flanges with male and female face for PN 5.0MPa (50 bar)
GB/T9115.20-1988PN5.0MPa(50bar)凹凸面对焊钢制管法兰