1.
Experimental Research on the Effect of Length of Piezoelectric Bender on its Characteristics
压电弯曲元件的长度对其特性影响的实验研究
2.
Influence of the thickness of piezoelectric and elastic layers on the bender element characteristic
压电及弹性层厚度对弯曲元件特性影响的研究
3.
Buckling and Bending Control of Functionally Gradient Thin Elastic Plate Boned Piezoelectric Patches;
具有压电元件的功能梯度弹性薄板的屈曲与弯曲控制
4.
Finite Element Analysis of Distortional Buckling of Cold-formed Thin-walled Lipped Channel Beam-column;
冷弯薄壁卷边槽钢压弯构件畸变屈曲有限元模拟
5.
Effect of bending angle on hydroforming of curved hollow components
弯曲角度对弯曲轴线件内高压成形的影响分析
6.
Study on the Shear Wave Velocity Measurement from Bender Elements and Dynamic Properties of Saturated Soft Marine Clay;
压电陶瓷弯曲元剪切波速测试及饱和海洋软土动力特性研究
7.
Bending behaviors of functionally gradient piezoelectric curved cantilever was studied.
研究了弯曲型梯度功能压电悬臂梁的弯曲特性。
8.
Research of elastic flexure buckling performance of pre-twisted bar under axial pressure
初始扭转轴压杆弯曲屈曲性能有限元验证分析
9.
Research and Development on Sheet Metal Bending Parts CAPP System;
冲压弯曲件CAPP系统研究与开发
10.
Study on elastic distortional buckling of lipped channel beam-columns
卷边槽钢压弯构件弹性畸变屈曲研究
11.
Local Buckling and Post-Buckling Strength of Tapered Member;
楔形压弯构件的局部屈曲及屈曲后强度
12.
The FEM Simulation of Bending Part using High Pressure Rubber Forming;
高压橡皮成形弯边零件的有限元模拟
13.
Light Out-Coupling Efficiency in Flexible Organic Light-Emitting Devices
可弯曲式有机电致发光器件的出光率
14.
Finite Element Analysis of Derrick Bearing Capacity with Bending Bar
含弯曲杆件的井架承载能力有限元分析
15.
FE Simulation of Automobile Forward Shaft on Bending Forming and Whole Final Forging Procedure;
汽车前轴锻件弯曲与整体终锻过程有限元模拟
16.
Software Development on Finite Element Analysis for Bending Stresses of Transmission Gears;
变速器齿轮弯曲应力分析有限元软件的开发
17.
Bending of thick rectangular plates with adjacent simply supported,one fixed and one free edges under hydrostatic pressure
静水压力作用下复合边界条件厚矩形板的弯曲
18.
Testing method for static flexural strength of piezoelectric ceramics
GB/T11387-1989压电陶瓷材料静态弯曲强度试验方法