1.
Analysis of Influence of Decay-Cooling Time on on-Line Burnup Measurement of HTR-PM
冷却衰变时间对球床模块式高温气冷堆在线燃耗测量的影响分析
2.
cooling the preform mould by chiller instead of water tower could reduce the cycle time by 10%.
以冰水冷却瓶坯模具比水塔水冷却缩短冷却时间10%
3.
indirect cooling air cooler
间接冷却式空气冷却器
4.
Preparation now resets the cooldown of Shadowstep and no longer resets the cooldown of Adrenaline Rush.
预备：现在它重置“暗影步”的冷却时间，但不重置“冲动”的冷却时间了。
5.
A gas is cooled by expansion and heated by compression.
气体膨胀时冷却，压缩时变热。
6.
Lightning Shield" will now have the appropriate cool-down time between uses.
闪电盾现在有了正确的冷却时间。
7.
Counterspell" no longer triggers the global cooldown.
法术反制”不再触发全局冷却时间。
8.
This talent no longer reduces the cooldown of Sprint.
这个天赋不再减少急跑得冷却时间。
9.
Can be directed using Target of Vengeance.
施法距离700，冷却时间35秒。
10.
When molten steel cools, it changes into a solid.
当钢水冷却时，它变为固体。
11.
The metal hardened when it was cooled in the air.
金属在空气中冷却时变硬。
12.
Cooling time dominates cycle time in thick-wall moulding like preform moulding.
属厚壁注塑的瓶坯，冷却时间支配着周期时间。
13.
having the property of softening or fusing when heated and of hardening and becoming rigid again when cooled.
有软化或熔化的特性，当加热时变软、冷却时变硬。
14.
When chilled water is used to cool the mould, cycle time is related to wall thickness as follows.
在冰水冷却的条件下，冷却时间与壁厚有以下的关系。
15.
Its decay probability per second is the inverse of this time.
每秒的衰变几率是这个时间的倒数。
16.
Allied Supply Drop cooldown increased to5 m from3 m.
空投资源冷却时间从3分钟增加到5分钟。
17.
Increase in cooling time is proportional to the square of the increase in thickness.
冷却时间增加同厚度增加的平方成正比。
18.
Crusader Strike (Retribution) cooldown reduced from 10 to 6 seconds.
十字军打击冷却时间从10秒减少到6秒。