1.
The Study of Dynamic Simulation in Mudstone Rheology and Optimum Balance of High Pressure of Injection and Production;
高压注采条件下岩石流变效应及最优注采平衡动态模拟研究
2.
Solution of High Gas Harder Coal Mining by Deep High-pressure Water
利用深孔高压注水解决高瓦斯较坚硬煤层开采
3.
EOR through depressurization and augmented injection with surfactant
利用表面活性剂降压增注提高采收率技术
4.
Implementing Automatic Startup of High-pressure Injection Pump by Adopting V1200 Pneumatic Valve
采用V1200气动阀实现高压注水泵自动启泵
5.
Applying dropout superposition to injection and production allocation for high permeability reservoir
应用压降叠加原理指导高渗透油藏注采调配
6.
Application of High-pressure Water Injection in Coal Seam at Fully Mechanized Caving Face
煤层高压注水在综采放顶煤工作面的应用
7.
The Study of Permanent Magnet Synchronous Motors Control System That Checks Position Using High Frequency Voltage Signal Injection;
采用高频电压信号注入法检测位置的PMSM控制系统研究
8.
A new method of research on injection-production pressure system and reasonable injection-production ratio
注采压力系统及合理注采比研究的一种方法
9.
Abstract: Using high pressure greasing technique, the special protection grease for steel cable is poured into the flax wick of steel cable at the operation.
文摘:采用高压注脂技术，向运行中的钢丝绳麻芯内注入专用的钢丝绳防护脂。
10.
angiocardiography high pressure injector
心血管造影高压注射器
11.
high pressure coolant injection system
高压冷却剂注入系统
12.
Technical specification for jet grouting
高压旋喷注浆技术规程
13.
Retainer ring, holder and wedge section are made from GFRPP with high strength, anti-corrosion, impact resistance, size stability etc.
曝气器的压盖、座、型卡座采用玻璃纤维增强聚丙烯注塑成型，强度高、腐蚀、冲击、构尺寸稳定。
14.
Research on Mining Technology with High Mining Height and Development of Powered Support for High Mining Height
大采高技术与大采高液压支架的开发研究
15.
Adjusting Data Collecting and Processing System by 4.5 Gpa Piston Static High Pressure Device;
静水压活塞高压装置压力校正数据采集系统
16.
The Study of Determining Reservoir Pressure under Different Injection-Production Ratio Conditions;
不同注采比条件下油藏压力确定方法研究
17.
Calculating the limit injector-producer distance in low permeability pool by with start-up pressure gradient
利用启动压力梯度计算低渗油藏极限注采井距
18.
Establishment and Evaluation of Injection-Production Pressure System in Medium Water-Cut Period of Shanshan Oilfield
鄯善油田中含水期注采压力系统建立与评价