1.
Study on Ti-bearing low carbon bainitic steel with 900 MPa yield strength
900MPa含Ti低碳贝氏体钢的研究
2.
Reasons of Unstable Impact Energy for a Boron-containing Low Carbon Bainitic Steel
含硼低碳贝氏体钢冲击值不稳定原因分析
3.
Microstructures and Mechanical Properties of Low-Temperature Bainite in Low-Alloyed Hi-Carbon Si-Containing Steels;
低合金含硅高碳钢低温贝氏体的组织和力学性能
4.
EFFECT OF DAMNIFICATION IN RUST LAYER ON CORROSION BEHAVIORS OF LOW CARBON BAINITIC STEEL IN THE ENVIRONMENT CONTAINING C1~-
锈层损伤对低碳贝氏体钢在含C1~-环境中腐蚀行为的影响
5.
On Nucleation and Growth Kinetics of Bainite Transformation of Low and Medium Carbon Steels;
中低碳钢贝氏体形核长大动力学研究
6.
Study on the Microstructure and Properties of Low Carbon Bainitic Steel Q460E;
Q460E低碳贝氏体钢的组织与性能研究
7.
Production practice of 700 MPa grade low carbon bainitic steel
700MPa级低碳贝氏体钢的生产实践
8.
Analysis of Disqualification of Low Carbon Bainite High-strength Steel in Ultrasonic Inspection
低碳贝氏体高强钢探伤不合原因分析
9.
Continuous cooling transformation of 600 MPa grade low carbon bainite steel produced by CSP process
CSP生产600MPa级低碳贝氏体钢的相变
10.
Initial corrosion of low-carbon bainitic steel under thin liquid film
低碳贝氏体钢在薄液膜下的初期腐蚀
11.
Study of Continuous Cooling after Austenite Deformation of Low Carbon Bainitic Steels;
低碳贝氏体型钢变形奥氏体连续冷却研究
12.
Effect of Minor Boron on Undercooled Austenite Transformation in Low Carbon Bainite Steel
微量硼对低碳贝氏体钢过冷奥氏体转变的影响
13.
Refinement of Structures and Improvement of Mechanical Properties for Low-Alloy Bainite Steels;
低碳贝氏体钢组织细化及力学性能的改善
14.
Study on Preparation and Performance of Mn -Series Low & Medium Carbon Bainitic Structural Steels;
Mn-系中、低碳贝氏体结构钢的制备与性能研究
15.
Effect of Copper on the Corrosion Resistance of a Ultra-low Carbon Bainitic Steel;
铜对超低碳贝氏体钢耐腐蚀性能的影响
16.
Optimization Reasearch on Strength and Toughness of Low Carbon Mn-series Air Cooling Bainitic Steel
低碳Mn系空冷贝氏体钢的强韧性优化研究
17.
The Application of Ultra-low Carbon Bainite Steel in Centrifugal Fan
超低碳贝氏体钢在离心通风机上的应用
18.
Effect of cooling process on microstructure and properties of untra-low-carbon bainitic steel
冷却工艺对超低碳贝氏体钢组织和性能的影响