1.
Determination and application of high temperature friction factor for Mn18Cr18N steel
Mn18Cr18N钢高温摩擦因子测定及其应用
2.
The results show that, with rise of the applied load and sliding speed, the friction coefficient decreases.
温度对准晶材料表面的摩擦系数影响明显比其他因素大,温度的增加明显提高地表面摩擦系数。
3.
Research on Influence of Friction Surface Temperature on the Friction Coefficient of Micro-car Clutch Friction Material
摩擦面温度对微车离合器摩擦材料摩擦因数影响的研究
4.
The Influence of Friction Surface Temperature on Friction Coefficient of Clutch Friction Pair
离合器摩擦副表面温度对摩擦因数的影响
5.
RESEARCH PROGRESS IN FRICTIONAL PROPERTIES AT HIGH-TEMPERATURE OF FRICTION MATERIALS BASED ON PHENOLIC RESIN
酚醛树脂基摩擦材料高温摩擦性能的研究进展
6.
Effect of Temperature on Wear Behaviors of MoSi_2 against Si_3N_4
温度对MoSi_2/Si_3N_4高温摩擦磨损行为的影响
7.
Study on Tribological Mechanism of WS_2 Submicron Particle and Preparation of High Performance High Temperature Grease;
WS_2亚微米粒子摩擦学机理研究及高性能高温润滑脂研制
8.
the tribology materials and lubricants for high temperature application or with low friction and long service life ;
适合于高温应用的或具有低摩擦长寿命的摩擦学材料和润滑剂;
9.
Friction and Wear Behavior of Graphite Partiele/Al Composites at High Sliding Speed and High Temperature
铝/石墨复合材料高速高温下的摩擦磨损特性
10.
To become worn or sore from rubbing.
擦伤，擦疼因摩擦而磨损或擦疼
11.
Research on the Tribological Characteristics of Silocon Carbide and Its Composites at High-Temperatures;
碳化硅及其复相陶瓷高温摩擦学特性的研究
12.
Research on Mechanical Properties at High Temperature and Tribological Characteristic on Mg_(97)Zn_1Y_2 Alloys;
Mg_（97）Zn_1Y_2合金高温性能与摩擦学行为研究
13.
Research of the Friction and Wear Behaviors of MoSi_2 and MoSi_2-based Composites at Elevated Temperature
MoSi_2及其复合材料的高温摩擦磨损性能研究
14.
Simultaneous Spheroidization and Refinement of Si Phase in Al-Si Alloy Surface by Friction at Elevated Temperature
铝硅合金高温摩擦表层Si相细化和球化现象
15.
Study of Tribological Properties of High Temperature Self-lubrication Composites with an Interpenetrating Network
互穿网络式高温自润滑材料摩擦磨损性能研究
16.
Study on Tribological Properties of Steel-copper Couples in High Temperature and Oxygen Atmosphere
高温氧气条件下CrNiMo钢的摩擦磨损特性研究
17.
Plastic deformation heat and friction heat are the two principle factors which caused the temperature rise of cold rolled thin plate.
冷轧时轧件塑性变形热和摩擦热是导致轧件温度升高的两个主要原因。
18.
It is right proceedings that rub to charge when comb rub hair, car run on road or shoes move on carpet.
梳子摩擦头发，汽车摩擦道路或鞋摩擦地毯，就是摩擦起电的过程。