1.
EXPERIMENTAL STUDY ON THE MECHANICAL PROPERTY OF REDUCED BEAM SECTION CONNECTIONS OF STEEL FRAMES
钢框架梁翼缘削弱型节点力学性能的试验研究
2.
Experimental and Theoretical Research on Reduced Beam Section Connections of Steel Frame;
钢框架梁翼缘削弱型节点的试验研究及理论分析
3.
FINITE ELEMENT ANALYSIS AND EXPERIMENTAL STUDY ON THE BEHAVIOR OF REDUCED BEAM SECTION CONNECTIONS OF STEEL FRAME UNDER CYCLIC LOADING
钢框架梁翼缘削弱型节点循环荷载作用下的有限元分析及试验研究
4.
The effect of dog-bone style weakened flanges of shaped steel on SRC joints
型钢翼缘狗骨式削弱在型钢混凝土节点的作用
5.
Study on Behavior of Extended End-plate Connection Joint with Reduce-beam Section in Beam-to-column Weak-axis Direction
翼缘削弱型外伸式端板连接节点在梁柱弱轴方向的受力性能研究
6.
Research on Seismic Behavior of Steel Frames with Reduced Beam Sections;
采用翼缘削弱型梁柱节点的钢框架的抗震性能研究
7.
Test on Seismic Behavior of Interior Joints with Dog-bone Type Weakening at the Ends of Beam of Steel Reinforced Concrete Frame;
型钢混凝土框架梁端翼缘狗骨式削弱型中节点抗震性能的试验研究
8.
Experiment on Seismic Behavior of Steel Reinforced Concrete Frames with Reduced Beam Sections;
翼缘削弱的型钢混凝土框架抗震性能试验研究
9.
Seismic Capacity Design and Nonlinear Analysis of Steel Reinforced Concrete Frame with Reduced Beam Sections;
翼缘削弱的型钢混凝土框架的抗震能力设计与非线性分析
10.
Seismic Behavior of Steel Reinforced Concrete Frame with Dog-bone Type Reduced Beam Sections;
翼缘狗骨式削弱的型钢混凝土框架抗震性能研究
11.
Theory Studies on the Behaviors of Beam-Column Connections with Beam-End Horizontal Haunch;
梁端翼缘扩大型梁柱节点受力性能理论分析
12.
Experimental Evaluation on the Behaviors of Beam-To-Column Connections with Beam-End Horizontal Haunch;
梁端翼缘扩大型梁柱节点受力性能的试验研究
13.
Seismic behavior and design method of beam-to-column connections with beam-end horizontal haunches
梁端翼缘扩大型梁柱节点抗震性能和设计方法
14.
Investigation of Reduced Beam Section Connections by Use of Web Openings;
梁腹板削弱型节点在循环荷载作用下的性能
15.
The contribution of flange to the anti-shear of joints has the characteristic of lag.
节点翼缘对节点的抗剪贡献具有滞后性的特点。
16.
Selection and Design on Reduced Beam Section Welding Collection of Concrete-Filled Steel Square Tubular Column and Steel Beam;
削弱梁端的方钢管混凝土柱—焊接钢梁节点选型及设计
17.
These include gusset plates welded to the flange.
这些包括焊接到翼缘上的节点板。
18.
Three structures have exhibited cracking at the ends of flange gusset plates.
已有三个结构在翼缘节点板端部出现了裂纹。