1.
Quasi-Static Cyclic Tests and Plastic Hinge Analysis of RC Structural Walls
钢筋混凝土墙准静力循环试验和塑性铰分析
2.
Local Buckling Check According to Eurocode-3 for Plastic-Hinge Analysis of 3-D Steel Frames
基于欧洲规范3中三维钢框架塑性铰分析的局部屈曲检验
3.
The ultimate load of plate girders was analyzed by spline finite strip and plastic hinge method.
用样条有限条塑性铰法分析了板梁的极限荷载。
4.
Shear Capacity of Plastic Hinge Region of RC Shear Wall;
钢筋混凝土剪力墙塑性铰区受剪承载力分析
5.
The Analysis of Pile-Soil-Structure Dynamical Interaction Based on Plastic Hinge Theory;
基于塑性铰理论的桩—土—结构动力相互作用分析
6.
Mechanism of Plastic Hinge and Non-linear Analysis of Prestressed Subassemblage Concrete Frame
预压装配式预应力混凝土结构框架塑性铰机理研究及非线性分析
7.
Virtual Work Method of Rectangular Two-Way Slab Considering Resistance Moment of Inclined Yield Line
考虑斜向塑性铰线抵抗弯矩的矩形双向板虚功分析法
8.
After the inelastic phase, the distributing of plastic hinges is proper and reasonable, and the requirement of ductility design of structure is satisfied.
进入塑性阶段后，塑性铰分布合理，满足了结构延性设计的要求。
9.
Experimental Research and Theoretic Analysis on the Relations of Plastic Hinges and Reinforced Concrete Eccentric Beam-column Joints Connecting Spread-ended Beams;
钢筋混凝土偏心节点梁端水平加腋与塑性铰关系试验研究及理论分析
10.
The Reliability Analysis for 20000kN Static Presser s Hinge Sleeve System;
20000kN静压机铰链梁系统的可靠性分析
11.
Based on Stainless Steel Reaming Process Performance Analysis
基于不锈钢铰削加工工艺性能的分析
12.
Design and Analysis of Positioning Complaint Mechanisms
柔性铰链精密定位机构的设计与分析
13.
Research on Statics, Dynamics, Fatigue Life and Reliability of the Flexure Hinge;
柔性铰链静动力学、疲劳寿命及可靠性分析研究
14.
An Analysis of Mechanical Performance of Flexural Hinges In Bender;
压弯微调机构中柔性铰链的机械性能分析
15.
The performance analysis of the half hybrid flexure hinge based on the FEM
基于有限元法的单边混合柔性铰链的性能分析
16.
The plastic elemental stiffness matrix was derived by plastic-hinge method.
然后用塑性铰法推导了单元的塑性刚度矩阵。
17.
Yield-line Theory Application and Studying of Thin Plate Curve Problem;
薄板弯曲问题的塑性铰线法应用研究
18.
Solution Method for Anti-blast Ability of the Wall Based on Yield Line Theory
利用塑性铰线理论求解墙体抗爆能力