1.
Construction Method of Post-pouring Flange Plate of Simple Box Girder in Passenger Dedicated Line
客运专线简支箱梁后浇翼缘板施工工法
2.
The Manufacturing and Usage of Box Beam Flange Slab Casting Form for Special Passenger Line
高速客运专线过隧道箱梁翼缘板补浇筑模架的研制与使用
3.
The outer rear edge of the wing of a bird, containing the primary feathers.
翼尖，前翼鸟翼的外后缘，包括初生毛
4.
trailing-edge flap position indicator
后缘襟翼位置指示器
5.
The ailerons are movable sections along the rear edges of the wings.
副翼是机翼后缘的可动部分。
6.
a straight line connecting the leading and trailing edges of an airfoil.
连接机翼的前缘与后缘的直线.
7.
These include gusset plates welded to the flange.
这些包括焊接到翼缘上的节点板。
8.
The web and flanges of the main girders were fabricated from ASTM A441 steel.
主梁的腹板和翼缘用ASTM A441钢制造。
9.
THE EFFECTIVE FLANGE WIDTH OF BEAM SUPPORT SECTIONS IN CAST-IN-SITU FLOORS UNDER VERTICAL LOADS
竖向荷载下现浇楼盖中的梁支座截面有效翼缘宽度
10.
Experimental Research and Analysis of Effective Flange Width of Beam End Section in Cast-in-Situ Concrete Frames
现浇混凝土框架梁端截面有效翼缘宽度的试验研究与分析
11.
Small rectangular backup bars were used to fabricate the web-bottom flange connection.
在腹板与下翼缘的施焊中使用小矩形挡板。
12.
Effective Width and Plate-to-Plate Restriction Calculations of Profiled Steel Sheeting
压型钢板翼缘有效宽度及板组约束的研究
13.
The effects of trailing edge jets on the vortex breakdown location over a delta wing
三角翼后缘喷流对前缘涡破裂位置的影响
14.
The front wing was hanging off and the right rear tyre was off the rim.
前翼掉了下来，右后轮胎濒临爆胎边缘。
15.
Effects of Leading-edge Vortex on Flutter Characteristics of High Sweep Angle Wing
大后掠翼前缘涡对其颤振特性的影响
16.
Both flange and web exhibited satisfactory elongation characteristics (i.e. 28%).
翼缘和腹板都有令人满意的延伸率（即28％）。
17.
Three structures have exhibited cracking at the ends of flange gusset plates.
已有三个结构在翼缘节点板端部出现了裂纹。
18.
Influences and treatment of the diaphragm structure on flange stress when box beam widening
箱梁拼宽时隔板构造对翼缘应力的影响及处理