1.
Interface characteristics of 45 steel/25Cr5MoA/Q235 steel solid-solid cladding shafts
45钢/25Cr5MoA/Q235钢固-固复合轴界面特性
2.
Research on Interface Characteristics of 25Cr5MoA/Q235 Solid-solid Clad Shaft
25Cr5MoA/Q235钢固-固复合轴界面特性的试验研究
3.
A review of the influential factors of the curing degree of light curing composite resin
光固化复合树脂固化程度的影响因素
4.
Research on Semisolid Casting-rolling Bonding of Steel-backed Al-28Pb Bonding Plate;
钢背Al-28Pb复合板半固态铸轧复合研究
5.
Study on Curing System of Four-components HTPB Composite Propellants;
丁羟四组元复合固体推进剂固化体系研究
6.
Consolidation Mechanism and Application of Vertical Reinforced Composition Ground;
竖向加固体复合地基的固结机理与应用
7.
Analysis on factors influencing process-induced deformation for thermoset composites
热固性树脂基复合材料固化变形影响因素分析
8.
Effect of Compound Field on Solidification Behavior of A356 Alloy
复合场对A356合金凝固行为的影响
9.
Pilot test production on doped and compounded LiMn_2O_4 by solid state method
固相法中试合成掺杂复合的LiMn_2O_4
10.
Cold Drawn-liquid Soild Diffusion Bonding Technique for Preparation of Low-carbon Steel/stainless Steel Cladding Tube
冷拔-液固相扩散复合法制备碳钢/不锈钢复合管
11.
closed reduction and intra-medullary nailing
闭合复位髓内针内固定术
12.
fiber reinforcement
纤维强化热固性/纤维强化复合材料
13.
Applications of carbon fiber composites on SRM
碳纤维复合材料在固体火箭上的应用
14.
Investigation of Semi-Solid Welding of SiCp/6061Al Composites;
SiCp/6061Al复合材料半固态焊接研究
15.
Experiment Research of Nanometer TiO_2 Catalytic Combustion to Desulfurization;
纳米TiO_2复合体掺烧固硫的实验研究
16.
Compound Stabilization of MSW Incineration Fly Ash with Copperas and Cement;
垃圾焚烧飞灰的复合稳定化/固化研究
17.
Study on the Composite Plating Technology of Fixed Diamond Wire;
固结金刚石线锯的复合电镀工艺研究
18.
Identification and Control of the Process for Composite Forming by Liquid-Solid Extrusion;
复合材料液—固挤压过程辨识与控制