1.
LOW-CYCLE FATIGUE BEHAVIOR OF AS-EXTRUDED Mg-x%Al-3%Ni ALLOYS
挤压变形Mg-x%Al-3%Ni合金的低周疲劳行为
2.
Research on Mechanism of Combustion Synthesis of Mg_2Ni and the Hydrogen Storage Property of Mg-Al-Ni;
Mg_2Ni的燃烧合成机理及三元合金Mg-Al-Ni储氢性能研究
3.
Effect of Heat Treatments on Mechanical Properties of Exruded Mg-Al-Ni(-RE) Alloys
热处理对挤压变形Mg-Al-Ni(-RE)合金力学性能的影响
4.
The influence of adding Al, Ti on the cycle stability of Mg-Ni hydrogen storage alloy
Al、Ti元素添加对非晶态Mg-Ni储氢合金循环稳定性的影响
5.
Influence of aging on microstructure and properties of extruded Mg-6%Al-0.5%Ni alloy
时效对挤压变形Mg-6%Al-0.5%Ni合金组织与性能的影响
6.
Preparation and properties of Al flakes and Al/Mg alloy powder
片状Al及Al//Mg合金粉的制备及性能
7.
Effect of Rolling Process on Damping Capacity and Mechanical Properties of Mg-3%Al Alloy
轧制变形对Mg-3%Al合金阻尼性能和力学性能的影响
8.
Effect of Zn on Microstructure and Mechanical Properties of As-cast Mg-3%Al Alloys
锌对Mg-3%Al合金铸态显微组织和力学性能的影响
9.
Effects of Al Content on the High Temperature Mechanical Properties of Ni-CCNTs/Mg-Al-Zn Composites
Al对Ni-CCNTs/Mg复合材料高温力学性能的影响
10.
Grain Refinement Behavior of Al-10%Mg Master Alloy on Al-5%Fe Alloy
Al-10%Mg中间合金细化Al-5%Fe合金的研究
11.
High Strength Deflection Aluminium Alloy --Al-Zn-Mg-Cu Alloy;
高强度变形铝合金———Al-Zn-Mg-Cu系合金
12.
Preparation of Al-Mg Alloy by Powder Metallurgy Forming
Al-Mg合金粉末冶金成形性研究
13.
The Mechanical Alloying of Fe-Ni-Al and Fe-Ni-Ce Systems;
Fe-Ni-Al和Fe-Ni-Ce三元合金的机械合金化研究
14.
Investigation of Mg-Cu(Ni) Bulk Metallic Glasses and Composites;
Mg-Cu（Ni）基非晶合金及复合材料的研究
15.
The 673K and 1123K Isothermal Sections (Partial) of the Phase Diagram of the Ce-Mg-Ni Ternary System;
Mg-Ni-Ce三元系合金相图673K和1123K等温截面（富Ni区）
16.
The Strengthening Effect of Al-Zr-Cr-La Dispersoid to Al-Mg Alloy
Al-Zr-Cr-La多元弥散相对Al-Mg合金的强化作用
17.
Basic Investigation on Microstructure Controlling of Mg-Al-Si and Mg-Zn-Al Based Magnesium Alloys;
Mg-Al-Si系和Mg-Zn-Al系镁合金组织控制的基础研究
18.
Electronic Structure and Mechanical Properties of Mg-Al-Ca Laves Phase and Mg-Al-Sb Alloys
Mg-Al-Ca Laves相和Mg-Al-Sb合金的电子结构和力学性能