1.
Analysis of Temperature Fields in Coated Cutting Tools Based on BEM;
基于边界元法的涂层刀具温度场分析
2.
The Influence of Workpiece Flow Stress Models on Finite Element Analysis Results of Tool Temperatures
流动应力模型对刀具温度有限元分析的影响
3.
Investigation on Cutting Temperature in Green Machining of SiC_p/Al Composites
绿色切削SiC_p/Al复合材料的刀具温度研究
4.
Prediction and Measurement of Cutting Temperature for Coated Tools
涂层刀具切削温度及其测试技术研究
5.
Coupled algorithm for the simulation of temperature distribution in cutting tool
车削刀具内温度分布模拟的耦合方法
6.
Various cutting tool materials begin to lose their hardness at different temperatures.
不同的切削刀具材料在不同的温度点开始软化。
7.
New Approach to Analyze Heat Flux Transferred to Coated Tools
基于对流换热原理的刀具热量和温度研究
8.
Experimental study on cutter adhering disrepair based on temperature field analysis
基于温度场分析的刀具粘结破损实验研究
9.
Hence, the hardness of the tool and the degree to which it remains its hardness at high temperature are important in the selection of a cutting-tool material.
因此,刀具的硬度和它在高温下所能保持的硬度是选择切削刀具材料时的重要因素。
10.
Study on Cutting Force and Temperature in Ultrasonic VibrationTurning of 45 Hardened Steel with PCBN Cutters
PCBN刀具超声振动车削45淬火钢的切削力与温度研究
11.
Hanging moulds (knives) seat can increase replacing speed.
悬挂式模具（刀）组座，可提高模具，刀具的更换速度。
12.
Effect of holding time on the brazing properties of PCD cutting tools
恒温时间对PCD刀具焊接性能的影响
13.
The most important properties of cutting tools are hardness at high temperature, wear resistance, and impact strength.
切削刀具最重要的性能是在高温下能保持的硬度、耐磨损和冲击韧性。
14.
A cutting tool is wear-resistant if it resists abrasion at the cutting edge and along the tool face. Wear resistance improves as cutting tool hardness increases.
如果切削刀具的刃口和刀面耐磨,刀具就不易磨损。切削刀具的硬度越高,耐磨性就越好。
15.
Experiment Study on High-speed Steel Cutting Tool Wear under Cryogenic Cold Wind Turning;
高速钢刀具干式低温冷风车削磨损试验研究
16.
Study on the Post-weld Heat Preservation Technology of Hi-frequency Induction Brazing for PCD Cutting Tools;
PCD刀具高频感应钎焊焊后保温工艺研究
17.
Fabrication of Tools with Built-in Thin Film Thermocouple Sensors;
嵌入式薄膜热电偶测温刀具传感器的研制
18.
Wear Mechanism of Cemented Carbide Tool in High Speed Machining Iron-based Superalloy GH2132
高速车削铁基高温合金硬质合金刀具磨损机理