1.
Design of Injection Systerm of Lost Foam Casting under Negative Pressure
消失模负压铸造浇注系统设计的探讨
2.
Research on Thickness of Gas Interspace When Liquid Metal Flows in Process of Pouring in Expendable Pattern Casting
消失模负压铸造液态金属流动前沿气隙的厚度研究
3.
Lost Foam Casting of Burning off Expendable Pattern Under Negative Pressure Before Pouring
负压下先烧失白模再浇注的消失模铸造
4.
The Gating Design for Negative Pressure EPC.
负压消失模铸造原料磨衬板的浇注工艺设计
5.
Study on Mold Filling in Magnesium Alloy EPC Process with Vacuum
镁合金负压消失模铸造充型过程的研究
6.
The Mechanism and Application of Negative Pressure EPC Mold Collapse Defect
负压消失模铸造铸型坍塌缺陷的形成机理及应用
7.
Selection of Vacuum Pump and Capacity Calculation of Dust Separator in Lost Foam and V-process Casting
消失模与V法铸造用真空泵的选型和负压罐的计算
8.
Mould filling of low-pressure expendable pattern casting process for magnesium alloys
镁合金真空低压消失模铸造充型特征
9.
Gas Gap Pressure During Mold Filling Process in Expendable Pattern Casting
消失模铸造充型过程气隙压力的研究
10.
Study on Material of Ductile Cast Iron and Numerical Simulation of Lost Foam Casting for Large-size Punching Dies;
中大型冲压件模具球墨铸铁材料及消失模铸造数值模拟研究
11.
Research on Common Defects of Low-pressure Expendable Pattern Casting Process for Magnesium Alloy
镁合金真空低压消失模铸造常见缺陷分析
12.
Pressure-expendable Pattern Casting Process for Magnesium Alloy
镁合金真空低压消失模铸造的技术特征与实践
13.
Investigating on Parameters of Mold Filling in Magnesium Alloy EPC Process Under Controlled Pressure
可控气压下镁合金消失模铸造工艺参数的研究
14.
Investigation on the Typical Defects of Low Pressure-Lost Foam Casting (LP-LFC)Process with Mg Alloy;
镁合金低压消失模铸造典型缺陷试验研究
15.
Complex casting of magnesium alloy on pressure solidification with lost foam casting process
镁合金复杂缸盖零件消失模铸造压力凝固工艺
16.
Effects of Pressure Field on Structure and Properties of Lost Foam Casting ZL101 Alloy
压力场对ZL101铝合金消失模铸造性能的影响
17.
Study on the Cluster of LFC in Cast Iron&Cast Steel for Small to Medium Casting Process;
铸铁铸钢中小件消失模铸造串铸工艺研究
18.
INVESTIGATION ON THE MOLD FILLING CHARACTERISTICS OF GRAY IRON IN THE EPC PROCESS WITH UNBONDED SAND MOLDS;
灰铸铁干砂消失模铸造充型特性研究